Clutch master issue

[Coop]

Originally Posted by Bulgas

Thanx! I'll give it a go. I wondered about the lever being adjusted out to far and not letting the piston return. I'm going to back it out some tomorrow and see if it helps. I'm not getting any fluid to come down out of the reservoir.

I recommend reverse bleeding as mentioned if you are having that much trouble getting the air out. Around here you can get a syringe (without needle obviously) at the farm store.

This is a trials based video but the procedure is really the same for proper hydraulic lever adjustment:
http://www.youtube.com/watch?v=Lh3pm3z7CdY

[Bulgas]

Thank you! This may very well be my problem. Mine was adjusted in until the top of the allen socket was flush with the locknut. I'll check this first thing when I get in the garage. (after I start the heater) I do appreciate the input.

[Bulgas]

The adjustment on the lever seems to have been the problem. The video was a big help. It is still dragging do I don't know if I need to bleed it more or if something else is the issue. The gearbox oil has been drained out for some time. I'm getting other parts of the bike together and coming back to this issue. Thanx again guys.

[Coop]

Glad to hear it helped.