#11
|
|||
|
|||
Thank you for the compliment! I didn't think about grinding the paint off at the mounts, great tip,I'll do that.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#12
|
|||
|
|||
If this is the wide ratio transmission you got from me then-
It is complete and a 5 gear matched set. I bought it new and ran it in my personal bike (1987 CR 250). I took the set out of the bike before I sent it to you.It was not a loose gear set scattered here and there.I counted all the teeth and double checked the ratios before I sent it out to you in the original box. should fit 1986-1996 CR250 at the least. there are some slight differences between years on shafts and stock number of teeth on some years.I think and don't quote me that there was a 12 and 13 tooth shaft available depending on years.Ive also seen differences in other years a tooth here and a tooth there. But,make no mistake that is the original IMS wide ratio transmission set distributed by Moose racing at the time and application for 1986-1996 CR 250. Im sorry you are running into an issue. Look it over close,do you home work,Cross reference microfiche etc.etc. Don't listen to some joker whos" heard about this or heard about" that. Goodluck |
#13
|
|||
|
|||
Quote:
Update; The original IMS instructions had a typographical error. IMS Wide Ratio Transmission is now assembled and being installed in the new engine!
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 06-29-2017 at 12:14 PM. Reason: update |
#14
|
|||
|
|||
I am going back checking the install to see anything is incorrect.
This is how the mainshaft and countershaft were assembled. The two top bags include the two stock mainshaft gears. The three bottom bags include the three countershaft gears(the IMS gear and the stock gear are to the left of the bottom left bag, these are the ones that we are having a difficulty.) All these bags include the removed stock Honda gears, each bag is labeled with number of teeth for the Honda gear, then , at the bottom middle of the bags you will see the label. (replacement IMS gear with the number of teeth.) So this shows exactly which gears were removed , how many teeth they had, and how many teeth were on each IMS replacement gear that replaced them. I counted the teeth on each stock gear, then I counted the teeth on each IMS gear as I replaced them and labeled each bag. If anybody sees a problem, please let me know because I am scratching my head on this one.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:19 AM. |
#15
|
|||
|
|||
While I am waiting on some other detailed on the transmission, I am moving ahead with the chassis and other things. I just got some new parts.
Boyesen clutch cover IMS 3.1 gallon tank, which is giant-enormous. And front and rear Buchanan spokes
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 01-07-2023 at 11:20 AM. Reason: Repost photo |
#16
|
|||
|
|||
I laced up the 18 and 21 inch rims last night. Somewhat simple, I just ordered a stand so I can true them.
Rear rim. It was cold as heck here last night, so I laced them up in the den while I watched the Grand Tour with Jeremy Clarkson, James May and Richard Hammond. Front rim
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:19 AM. |
#17
|
|||
|
|||
Rear rim complete except for truing,
Front rim,
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:20 AM. |
#18
|
|||
|
|||
I tested fitted the IMS tank and this is how she looks so far.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:20 AM. |
#19
|
|||
|
|||
Bike is looking great! Did you want or need the enormous tank? Just thinking that a new Clarke stock capacity in white would give a nice original appearance.
|
#20
|
|||
|
|||
I was thinking the same thing and I am kinda on the fence right now about it. I could not find an IMS tank bigger than the stock tank without going to the 3.1.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DC conversion - not floating ground | johnm | Enduro Electrical & Wiring | 39 | 03-04-2020 11:11 AM |
Gas Gas Contact Jt 25 95 Restoration And Help | Eyetech | General Discussions & Announcements | 1 | 03-18-2016 03:33 PM |
2001 XC200 Restoration Project | Lincolnlock | Enduro Engine - 2 stroke | 19 | 04-22-2014 03:42 PM |
Hanging Idle after wide open | GasGas | Enduro Intake/Carburetion - 2 stroke | 10 | 09-06-2013 04:13 PM |
My Stomping ground | swazi_matt | Ride Reports | 10 | 03-02-2011 09:35 AM |