2011 Plastics

[twowheels]

Originally Posted by blanc

Looks close. May borrow one to see if it bolts on! Trying to get the graphics made to match the 2010 ones for the front and light should look good.

Looks great, but won't be a direct bolt-on. There is a tapped hole in the front of the GasGas upper triple, but I believe the Honda bolts down from the top. If you're not afraid of busting out the drill and tap you could be in business. What about the bottom interface though?

[djroggen]

I had an opportunity to fit a prototype number plate bracket kit today, with a finished product coming very shortly. The fitment was very good, and we should be seeing a white number plate kit available from http://www.gofasters.com in the very near future!

[john01]

Thanks for the heads up djroggen and I take it you are talking about the 2011 GG bikes?

[djroggen]

Yes it is intended for use with the 2011 bikes, but it should actually allow for a retrofitting of the bikes clear back to 04 and older yet. We will have to do some more testing to see how far back it will fit, but 2011 is what the kit is intended for!

[john01]

Thanks. If it works we will change our 2010 over to the 2011 in the front. with a new 2011 number plate and fender; provided we can get the front fenders that is.

[gasgasman]

Speaking of plastic.
Has anyone replaced the rear number plate/fender assembly with a red one(2011)?
I think it would look very nice.

[REVERUP]

Originally Posted by djroggen

I had an opportunity to fit a prototype number plate bracket kit today, with a finished product coming very shortly. The fitment was very good, and we should be seeing a white number plate kit available from http://www.gofasters.com in the very near future!

Good to hear and thanks for the news. How does it connect to the top triple clamp? Curious if the key for the e start will need to be relocated on e start equiped bikes.
Is this kit just to get by until the factory develops something or what they will offer?

Roscoe

[Clay]

Mark at GF told me today that he is almost through with a front number plate.