|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Thanx again people, Really I 'don't mean to sound neg towards the GG I just need to get the bike out to dial it in. I did find out one interesting thing. My bike is one of 3 or 4 250's here in Alberta. Maybe that is why I'm getting confused with the info. If I had one of those other cycles, there would be thousands of bikes to jet too. But I don't want to be just another face in a crowd I want to out perform and cover the crowd with dirt. That is why I bought a GG. Thanks again and I will post my results once dialed in. Maybe I may help others as GG in this area become more common place. Later
|
#12
|
|||
|
|||
I ride with a guy that has 2 250's and one ec 300. i have a ec300 as well. we have the 250's and the 300 's jetted just about identically. 172 mains in the cooler weather/170/168 in the summer,38/40 pilots/# 9 slides-not the stock #7s-(this seems to be a huge difference on the low end rpm rollon idleling problems.) i'm using a kawi needle-nozi or nozh as my needle jett is worn out more than the other bikes.the stock n1ef/n1eg series works well with the rest of the bikes. airscrew about 1.5-2.5 turns out needle clip is #2/3 in the bikes. we ride at evelavations of 1500-5000 ft. this isn't knocking the ltr kits,they seem to work for a lot of guy's,just giving some info if your intrested in another avenue on the road to jetting bliss!
|
#13
|
||||
|
||||
sorry this is not as simple as it should be. i spent an age chasing jetting nirvana and in then end wasn't far from dealer / importer advice. unfortunately there is a lot of personal taste involved. dealer / importer advice in the UK is based on a lot more bikes as Gas Gas is more popular here.
|
#14
|
|||
|
|||
Jetting and ltr
Again guys very thankful for all the replies to my post. I will take it all away and use what I need to and post results for all the canucks and everyone else to peer at. Nothing to fear but fear it'self.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
missing o ring | woody1965 | Enduro Intake/Carburetion - 2 stroke | 0 | 03-08-2010 01:02 PM |
Missing mid-top | Diddel | Enduro Electrical & Wiring | 0 | 10-26-2009 04:13 AM |
Anybody missing a GasGas? | Mark Berg - CPD | General Discussions & Announcements | 3 | 10-20-2009 03:05 PM |
LTR jetting what am I missing (follow up) | freshplaster | Enduro Intake/Carburetion - 2 stroke | 5 | 06-29-2007 12:40 PM |
Why's this missing? | brains | General Discussions & Announcements | 2 | 04-07-2007 12:41 AM |