#31
|
|||
|
|||
I got new side caps for the swingarm. The swingarm was powdercoated silver.
I also installed the rear brake hose guides with cad bolts. I old brake pedal was a little beat up so I got a 2014 YZf 450 brake pedal and it bolted right up. I might need to trim the Yamaha bolt a bit with a dremel because it is close to the swingarm but is has good amount of clearance. I ordered a Yamaha master cylinder U clamp bc the YZF brake pedal is a little wider where it joins the master cylinder. Also, those footpegs are titanium and came off a 2009 YZ250. I used Yamaha pins and springs to mount them.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:23 AM. |
#32
|
|||
|
|||
I am very happy with the backgrounds and numbers from Decal Works.
I also installed a new oem tank strap. I'm not sure if the orientation of the strap is correct. I installed the new upper seat mount washer with a cad plated bolt. I also installed a new oem fuel valve and oring, pics to follow.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:23 AM. |
#33
|
|||
|
|||
I am going through a lot of Honda OEM parts, here is a shot of some of the empty bags.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:23 AM. |
#34
|
||||
|
||||
Wow! Had one 94 CR back there days!
Congratulations nice job
__________________
www.endurohp.eng.br Sherco ST300 2015 (Trials) https://www.instagram.com/leocm74/ Brasil! |
#35
|
|||
|
|||
Thanks very much!
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#36
|
|||
|
|||
Suspension from Works Enduro Rider
Shock, anodized black. Shocks and forks This is how she looks at the moment, ....we are getting there.....
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:24 AM. |
#37
|
|||
|
|||
I finished the rims, installed Tubliss inserts on the front and rear wheels with new metzeler tires. I put a Unicross on the front and Six Days on the rear. I got it off the stand and sat on it for the first time in 18 months!
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:24 AM. |
#38
|
|||
|
|||
Is there a special tool to remove the small round "grub"cover on the brake pad pin for the front brake caliper? Mine is seized up and I will put a torch on it but I wondered if there was a special tool to fit the groove, my impact driver fits the groove but it is just a little too wide
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#39
|
|||
|
|||
Quote:
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#40
|
|||
|
|||
I am trying to get the Honda finished and ride it a little before the 2018 Gassers get here. I mounted a "Braking" Wave rotor on the front and an EBC vented rotor on the rear. I finished bleeding the front brake and it works good. I hooked up the rear brake master cylinder linkage with the 2014 YZ450F brake pedal. I was able to use the stock Honda pin but I had to bend the Honda clevis. I had bought a New YZF clevis but it was a smaller size than the Honda master cylinder and I could not use it. The YZF pedal bolt cleared the swingarm but it was a little close.
I was going to install a Megura 314 throttle but I had trouble finding a throttle cable that I thought would work. I got a good deal on a Domino Throttle and I bought a nos Honda throttle cover that slipped right on without a problem.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar Last edited by Moto7man; 07-19-2017 at 10:25 AM. Reason: Grammer |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DC conversion - not floating ground | johnm | Enduro Electrical & Wiring | 39 | 03-04-2020 11:11 AM |
Gas Gas Contact Jt 25 95 Restoration And Help | Eyetech | General Discussions & Announcements | 1 | 03-18-2016 03:33 PM |
2001 XC200 Restoration Project | Lincolnlock | Enduro Engine - 2 stroke | 19 | 04-22-2014 03:42 PM |
Hanging Idle after wide open | GasGas | Enduro Intake/Carburetion - 2 stroke | 10 | 09-06-2013 04:13 PM |
My Stomping ground | swazi_matt | Ride Reports | 10 | 03-02-2011 09:35 AM |