|
Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion |
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
I got the issue fixed by myself, i sold the bike after i fixed the problem!
Problem fr me was worn out TPS and little bit helped if i changed the injector also. |
#32
|
|||
|
|||
Quote:
P.S. information to all other riders of GG that I've learned from local dealer - main ECU is the same as Sherco using. So, information, relevant to Sherco, may be relevant to GG (mutatis mutandis in legalize so to say) |
#33
|
|||
|
|||
Quote:
Many bikes use that ECU.....Sherco (up to 2013, from 2014 Sherco uses much better Synerject), Ducati,Piaggio uses the same....but there might be trouble to upload GG MAP to other ECU. Somewhere in this forum there was one user who had trouble uploading GG map to Piaggio ECU....but there was somekind of fix. |
#34
|
|||
|
|||
Quote:
Ps! Tere Tafka! |
#35
|
|||
|
|||
Quote:
Yeah, put a picture here! But isn't 2007 already with 3-pin coil? There were so many versions of the VAG coil and one that i tried didn't work. Didn't want to spend money, trying them all :P |
#36
|
|||
|
|||
MFS400380006 wire for MFS450780006
Have a 2007 GasGas 450 FSR that has always been a bit hard to start but now it won't start at all.
I have access to a 4 pin MFS400380006 coil, can this be wired from a MFS450780006 3 wire connection (Thinking plug has two commons.) to allow testing. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
testing lighting coil | bonkeye | Enduro Electrical & Wiring | 7 | 05-09-2012 07:51 PM |
FSE Coil-on-plug ohm readouts? | bergerhag | Enduro Engine 4 stroke (including EFI & Exhaust) | 1 | 10-20-2008 03:05 AM |
Coil? | bronco-hunter | Enduro Electrical & Wiring | 0 | 07-28-2008 06:48 PM |