Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Reviews

Enduro Product Reviews Feedback & Comments on Products Tested


Reply
 
Thread Tools Display Modes
  #1  
Old 07-30-2011, 11:25 AM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default Millenium Tech Cylinder Plating Review

First to say I give them a thumbs Down !!!
Called them a few weeks ago,spoke to someone who said $190 send it
I asked about buying or sending piston ,decided i'd buy my own and send it with cylinder.Sent out on a tuesday =priority shipping.
The following monday got a call saying my piston was damaged in shipping
Asked if i wanted to file a claim Recommended I didnt Said theyd send me a pic of damage -very minor .I asked if they had a pic of the box-(No, but it was bad) I sent the piston in its original box surrounded by paper in the shipping box the cylinder was in. Anyway my piston has a ding in the crown that to me is obvious a drop on metal or something metal dropped on it
Then i called thursday for a progress report Lady told me Tuesday...... had to go through quality control,,Would I like to pay now ?I said call me for payment when its ready for shipping. Tuesday I missed a call -By the time I got to the phone it stopped ringing- from them they left a message from a woman that theyd been trying
repeatedly to reach me for payment please contact asap.I called immediately
A man answered said theyd been trying to reach me since thursday,The day I called them.....$239 plus shipping please. HUH What happened to 190? Oh we had to do extra work to it .No welding just cleanup
I said no one called me about extra work ( Oh I told you that when I quoted you) I said BS you said 190 send it
Anyway got it yesterday. Cylinder Looks great. My piston was an obvious drop, It came back in the original piston box thats intact, no cuts or slices.
Did I mention cylinder looks great???? My opinion is that its a dishonest operation and I would recommend against doing business with them And I'm going to tell everyone I can the same
Stoby
Tried to Attach the pic they sent ,I couldnt


Reply With Quote


  #2  
Old 07-30-2011, 11:28 AM
Dude Dude is offline
Senior Member
 
Join Date: Jan 2011
Posts: 110
Default

I have been doing business with them for 15 years. Never a issue. there right down the road as well from me.
Reply With Quote
  #3  
Old 07-30-2011, 11:45 AM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default Maybe

Maybe i'm the 1 in 1,000,000 But I doubt it. I didnt even tell all of the story...
You live down the road i live far away .I wish they were just down the road from me.
Stoby
Reply With Quote
  #4  
Old 07-31-2011, 11:03 AM
Silver Silver is offline
Senior Member
 
Join Date: Jul 2007
Posts: 194
Default

A buddy of mine had issue with them said he would never use them again.
Reply With Quote
  #5  
Old 07-31-2011, 03:25 PM
Bailey28 Bailey28 is offline
Senior Member
 
Join Date: Jan 2011
Location: Gainesville Florida
Posts: 317
Default

Too bad Ron does not replate cylinders. I would send it to him in a second. I think he does boring, and sleeving but not replating.
__________________
'10 EC300 -- very happy
Reply With Quote
  #6  
Old 08-01-2011, 08:50 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

Quote:
Originally Posted by Stoby View Post
Anyway got it yesterday. Cylinder Looks great. My piston was an obvious drop, It came back in the original piston box thats intact, no cuts or slices.
I used them for my kids bike and supplied my own piston also. Communication and the work quality was excellent. The did the same to me with the price though. I'm thinking supply your own part and they get their lost parts mark-up that way.
Is it possible they used a box from another piston when they returned it to you? I work in the shipping industry so I see a lot of damaged freight. When you think you have something packaged safely take the time to put the final package in one more padded box. Our dock workers could care less if it said "fine china" or "explosive". It all gets handled the same way (rough).
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #7  
Old 08-01-2011, 12:38 PM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default

No same exact box that I sent . It still has my handwritten label on the box.
Thats what is so ridiculous ,at least cover up the lie. Plus if you could see the ding it goes up from the first ring land to the crown. the ding actually pushes the edge of the crown up. The only way that could happen is metal to metal and like i said no damage to piston box at all........I'm going to be able to file it down its nothing major its just the point .You mess up somebodies stuff you offer to fix or replace it. Never mind not taking the blame .Just too many lies they told me. i just call em as i see em and i dont want anyone else on here ,or anywhere to get what I got.
youll see I've posted everytime I've done good business with someone I'm not
In the habit of disparaging businesses.
So this is just a warning to my fellow riders not a bitch session
Stoby
Reply With Quote
  #8  
Old 08-01-2011, 05:54 PM
Dude Dude is offline
Senior Member
 
Join Date: Jan 2011
Posts: 110
Default

i think the price thing is bs. when i walk in its a flat 220 out the door.
Reply With Quote
  #9  
Old 08-01-2011, 09:51 PM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default

Jeez Dude Glad to know you think I'm lying. What I Gain from lying I dont know ??? Cant think of any reason..... If you look at there website it says 189 unless theres cylinder damage = extra machining. so then I guess everyones cylinder needs extra machining including yours .So wheres the 189 come from?
I really don't appreciate you questioning my integrity Esp. when its easier to not say nothing.The idea of this forum is to help each other. Thats why there are product reviews.
No reason to get personal unless its in person
Stoby
Reply With Quote
  #10  
Old 08-02-2011, 04:25 PM
Dude Dude is offline
Senior Member
 
Join Date: Jan 2011
Posts: 110
Default

no i meant i think the price gouge is b.s not saying your b.sing lol
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plating (license, not chrome) Thread twowheels Suggestion Box 5 09-06-2010 03:43 PM
GG Review on MotorcycleUSA blitz11 General Discussions & Announcements 4 07-11-2009 10:04 PM
2009 Review 2 strokes 4 life General Discussions & Announcements 2 11-26-2008 10:30 PM
Review of RB Design LAWMAN Enduro Product Reviews 6 07-13-2007 03:04 PM
Tech Article : Cylinder Head Squish webmaster General Discussions & Announcements 1 08-06-2006 08:45 AM




All times are GMT -5. The time now is 11:58 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org