|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
I was getting some bad vibration so I did this. There was more movement than I expected. I'd just done the crank a couple of rides before. The left crank bearing will have some slop.
. . . and the lower engine bolts had undone. Buggers to get to with water pipe in way. Oh look. Vibration sorted. Mental note to recheck them. And loctite.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#12
|
|||
|
|||
Quote:
Maybe worn exhaust o-rings? |
#13
|
|||
|
|||
Thought I'd post in here what it was in the end. So basically bought the bike second hand. And someone has had the swingarm off in the past. Basically the nut on the main pivot on the swingarm was bottomed out on the thread of the bolt. Put a washer behind it that I borrowed from work and she's all good
|
#14
|
||||
|
||||
Congrats on the inexpensive fix! Good thing you give yourself a price break on labor ;-)
|
#15
|
||||
|
||||
Congrats on the inexpensive fix! Good thing you give yourself a price break on diagnostics and labor time ;-)
|
#16
|
|||
|
|||
Glad you solved it! Good point to pass on to others that have problems
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
08 ec 300 vibration | fatdaddy | Enduro Engine - 2 stroke | 2 | 02-24-2012 10:58 AM |
vibration fix. | stainlesscycle | Enduro Engine - 2 stroke | 2 | 02-22-2012 07:49 AM |
vibration | peanutsracing1 | Enduro Chassis & Body | 3 | 04-19-2011 08:55 PM |
Vibration | mikeh | Enduro Engine - 2 stroke | 2 | 04-21-2010 04:18 PM |
foot peg vibration | MIKEWA | Enduro Chassis & Body | 3 | 03-19-2007 08:42 PM |