Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #21  
Old 03-21-2008, 07:58 PM
mountain thumper's Avatar
mountain thumper mountain thumper is offline
Senior Member
 
Join Date: Mar 2008
Location: missoula mt
Posts: 333
Default

Quote:
Originally Posted by Ud_luz View Post
I was looking on my 07 and the main wiring harness doesn't have all the connectors. It's rather amusing the bike has a front and rear brake switch but nothing to plug it in to.

I'm assuming GG is doing the same as KTM and has a stripped down wiring harness for the USA 07 and a full one for everybody else. I called Mark at GoFasters and he had no idea what I as talking about even though there's 2 different part numbers for the main harness.

I'm with you Josh, I would rather use the factory bits like I've done on my KTMs.

If anybody figures out a source I would also appreciate it
was one of the harnesses more expensive than the other?


__________________
Le Crutan
98 ec250 sixdays, doma, eline pipe guard, zokes shivers from a cr250,fredette racing chain slider, protaper withbarkbusters (SOLD)

FOR THE SECOND TIME 07 EC300 polisport headlight, acerbis taillight ltr pv cover and case saver,trailtech endurance,120z fww, g2 throttle,xr chain puck:
Reply With Quote


  #22  
Old 03-21-2008, 09:20 PM
Ud_luz's Avatar
Ud_luz Ud_luz is offline
Senior Member
 
Join Date: Feb 2007
Location: Sierra Vista, Arizona
Posts: 395
Default

Quote:
Originally Posted by mountain thumper View Post
was one of the harnesses more expensive than the other?
That would be a reasonable assumption since one of them is much more complex and heavier than the other.
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300
Reply With Quote
  #23  
Old 03-22-2008, 08:41 PM
mountain thumper's Avatar
mountain thumper mountain thumper is offline
Senior Member
 
Join Date: Mar 2008
Location: missoula mt
Posts: 333
Default

addendum, if you dont have the bigger stator, just cross the violet/yellow wires up front to feed the headlight all the juice
__________________
Le Crutan
98 ec250 sixdays, doma, eline pipe guard, zokes shivers from a cr250,fredette racing chain slider, protaper withbarkbusters (SOLD)

FOR THE SECOND TIME 07 EC300 polisport headlight, acerbis taillight ltr pv cover and case saver,trailtech endurance,120z fww, g2 throttle,xr chain puck:
Reply With Quote
  #24  
Old 03-22-2008, 08:43 PM
mountain thumper's Avatar
mountain thumper mountain thumper is offline
Senior Member
 
Join Date: Mar 2008
Location: missoula mt
Posts: 333
Default

Quote:
Originally Posted by Ud_luz View Post
That would be a reasonable assumption since one of them is much more complex and heavier than the other.
thats what i was wondering, ive had that problem with my old xr, 2 part numbers for the same part, but with a different price
__________________
Le Crutan
98 ec250 sixdays, doma, eline pipe guard, zokes shivers from a cr250,fredette racing chain slider, protaper withbarkbusters (SOLD)

FOR THE SECOND TIME 07 EC300 polisport headlight, acerbis taillight ltr pv cover and case saver,trailtech endurance,120z fww, g2 throttle,xr chain puck:
Reply With Quote
  #25  
Old 04-06-2008, 11:54 AM
Hollywood Hollywood is offline
Member
 
Join Date: Mar 2008
Location: Calgary
Posts: 46
Default

Quote:
Originally Posted by cladoo View Post
I would have but I just sold a DE300 to a guy and he wants all the stuff on it. So guess what I am doing today?
That's me! cladoo did a really good job on it too!
Reply With Quote
  #26  
Old 05-04-2008, 11:27 AM
Ud_luz's Avatar
Ud_luz Ud_luz is offline
Senior Member
 
Join Date: Feb 2007
Location: Sierra Vista, Arizona
Posts: 395
Default

I have a 2k3 and the Euro harness now. Anybody want to unload a handlebar switch, speedo and blinker box for an 07?
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300
Reply With Quote
  #27  
Old 05-04-2008, 11:59 AM
Brian VT Brian VT is offline
Senior Member
 
Join Date: Jul 2006
Location: Vermont, USA
Posts: 827
Default

Quote:
Originally Posted by Hollywood View Post
That's me! cladoo did a really good job on it too!
LOL ! "Hollywood" is the screen name of a local KTM rep./racer on another forum. I was temporarilly shocked when I read that he bought a Gasser ! Good thing I noticed it wasn't him before I started spreading the news ! LOL !

Last edited by Brian VT; 05-04-2008 at 12:35 PM.
Reply With Quote
  #28  
Old 05-04-2008, 12:18 PM
Hollywood Hollywood is offline
Member
 
Join Date: Mar 2008
Location: Calgary
Posts: 46
Default

Quote:
Originally Posted by Brian VT View Post
LOL ! "Hollywood" is the screen name of a local KTM rep./racer on another forum. I was temporarilly shocked when I read that he bought a Gasser ! Good thing I noticed it wasn't him before I started spreading a the news ! LOL !
Ya I had to pick HollywoodMX on thumper talk..

Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dual Sport Kit for GG 300EC blue273 Enduro Electrical & Wiring 2 10-10-2009 05:28 PM
Dual sport the EC250? 2 strokes 4 life General Discussions & Announcements 5 12-15-2008 09:17 AM
New dual-sport mirrors. anathema Enduro Chassis & Body 1 02-22-2007 07:46 PM




All times are GMT -5. The time now is 07:35 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org