Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-19-2015, 04:52 AM
FDB's Avatar
FDB FDB is offline
Senior Member
 
Join Date: Jun 2014
Posts: 119
Default Which rims lace up to GG hubs?

Hi guys.
I have two GG OEM hubs for the EC300.
I want to make spare wheels out of them, but only if it can be done relatively cheaply.
Does anyone know of any other brand bikes out there that runs rims that will lace up on a GG hub?
What are my options?


Reply With Quote


  #2  
Old 10-19-2015, 09:17 AM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

The lacing pattern is different on gasgas wheels so some spoke holes are drilled at a different angle than on other bikes. Any company that makes wheels can drill their rims for gassers and most if not all will. EXELL sells their blemished rims at a discount and sometimes have gasser rims. Check their website.
Reply With Quote
  #3  
Old 10-19-2015, 09:30 AM
FDB's Avatar
FDB FDB is offline
Senior Member
 
Join Date: Jun 2014
Posts: 119
Default

I was hoping to score some rims off a rolling chassis of some bike.
Will check out what rims are available in South Africa and take it from there.
Thanx guys

Sent from my GT-I9500 using Tapatalk
Reply With Quote
  #4  
Old 10-19-2015, 09:37 AM
poelinca's Avatar
poelinca poelinca is offline
Senior Member
 
Join Date: Jul 2015
Location: Bucharest, RO
Posts: 302
Default

Wouldn't it be easier, cheaper and faster to buy a set of used wheels that fit the same axle and then machine spacers yourself ?
__________________
'14 EC300
Reply With Quote
  #5  
Old 10-19-2015, 09:40 AM
FDB's Avatar
FDB FDB is offline
Senior Member
 
Join Date: Jun 2014
Posts: 119
Default

Probably.
Will check the options out.

Sent from my GT-I9500 using Tapatalk
Reply With Quote
  #6  
Old 10-19-2015, 09:50 AM
poelinca's Avatar
poelinca poelinca is offline
Senior Member
 
Join Date: Jul 2015
Location: Bucharest, RO
Posts: 302
Default

There is somebody here on the forums with a conversion of EC300 to supermoto, forgot who tough. Will let you know if i find the posts with the pics, he should have more info about this.
__________________
'14 EC300
Reply With Quote
  #7  
Old 10-19-2015, 01:39 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

I know the complete 1994 Honda CR 250 rear wheel will install exactly onto my 2011 EC300, I just checked it this weekend even the rotor slides into the caliper perfectly.

The 94 CR 250 front axle is 17mm and smaller than the GasGas front axle(25mm). However the GasGas Nissan brake calipers and 94 Cr 250 brakes are the same except the caliper carriers are a little different/and shorter.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #8  
Old 10-19-2015, 01:50 PM
FDB's Avatar
FDB FDB is offline
Senior Member
 
Join Date: Jun 2014
Posts: 119
Default

1994 cr wheel was a 19"?

Sent from my GT-I9500 using Tapatalk
Reply With Quote
  #9  
Old 10-19-2015, 11:00 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

Quote:
Originally Posted by FDB View Post
1994 cr wheel was a 19"?

Sent from my GT-I9500 using Tapatalk
Yep, it is 19. You can lace that hub with an 18 or 19 inch rim. Gasgas actually sells a 19 inch rim and spoke kit to convert the wheel to 19 and Honda offers the same conversion parts to switch their wheel to 18. The outer diameter of the 18 and 19 inch assembled wheels are the same.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #10  
Old 10-25-2015, 07:28 AM
forgiven forgiven is offline
Senior Member
 
Join Date: Jan 2009
Location: Ottawa Illinois
Posts: 595
Default

I have a good set of rims for 400 bucks. I have rotors, axles, etc. They are silver and are not the U shaped ones.


Sent from my iPhone using Tapatalk
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Complete Wheel Set - Red Hubs/Black Rims mcnut Parts 12 02-12-2016 11:32 AM
bearings / hubs Stoby Enduro Chassis & Body 5 05-03-2013 08:12 PM
AJP Hubs commando Enduro Chassis & Body 0 07-23-2012 08:36 AM
Gasgas white hubs, silver rims?? Keg General Discussions & Announcements 30 06-17-2011 08:31 PM




All times are GMT -5. The time now is 08:25 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org