GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-23-2008, 01:18 PM
MOREGas MOREGas is offline
Member
 
Join Date: Jun 2008
Posts: 1
Question Rattle in Turbine Core 2

Recently repacked the Turbine Core 2 on my '01 EC250. As soon as I got the can off the core, it started rattling in the tip. Cleaned, repacked and reassembled thinking that might fix it. Nope, still does it. What gives?
__________________
'01 EC250
Reply With Quote
  #2  
Old 06-23-2008, 02:33 PM
fury1's Avatar
fury1 fury1 is offline
Senior Member
 
Join Date: Jul 2006
Posts: 488
Default

there is a spout inside the tip,maybe the spout is broken inside,does it move if you put your hand imside the endcap? there isnt really anything else moveable if the rivets are all still in place holding the S/A turbine core in place
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
turbine core 2 repacking gregtenerife Enduro Engine - 2 stroke 1 04-22-2010 02:05 PM
FMF Turbine Core 2 Silencer fitment SpeedyManiac Enduro Engine - 2 stroke 2 06-23-2008 09:22 AM
FMF Turbine Core 2 DB sanderjavant Enduro Engine - 2 stroke 8 08-27-2007 07:58 PM
FMF Turbine Core on '07? GMP Enduro Engine - 2 stroke 4 02-21-2007 07:59 PM




All times are GMT -5. The time now is 06:27 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org