Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-13-2022, 07:16 PM
IdahoUSA207 IdahoUSA207 is offline
Member
 
Join Date: Dec 2021
Location: Emmett, Idaho
Posts: 2
Default 250 to 300 cylinder swap (search for torque)

Has anyway swapped their 250 to a 300 with the cylinder head kit?
This is my first 250 2-stroke Iv always been a 4 stroke or 300xc KTM guy..
I really like my 2019 GG 250xc but it is in my opinion a zingy 250, like a yz 125.. (ok maybe not that zingy &#128518 but you get the idea.
I like bottom end torque, I ride down low in the meat.
Iv looked at the 300cc cylinder head swaps on eBay.. just wonder if it will be worth the money? technically speaking it should be really? but I also have never rode a GG300 so are they tractor pull, grunt workers like the KTM 3honey?
Also, would swapping out the FMF fatty for a Gnarly make much of a difference? (Pre-cylinder swap that is) it would be nice to just swap out pipes in order to gain what I want but I just can see it making ?that big? of a difference alone.
And yes, most people will suggest ?do the gnarly pipe first and if it?s not enough so the cylinder swap??. Yes, thank you.. that?s great advice.
I?m wonder more if anyone has already experimented and could share their thoughts on rather the expensive cylinder swap is money well spent or is the slightly cheaper (not by much these days) gnarly pipe a good change to gain low end?
__________________
2019 GasGas XC250
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2019 300/250 cylinder swap IdahoUSA207 Enduro Engine - 2 stroke 1 12-23-2021 11:48 AM
Trick to torque recessed cylinder nuts d2w Enduro Engine - 2 stroke 9 02-13-2014 10:13 AM
Setting new cylinder studs - torque motogroove Enduro Engine - 2 stroke 3 07-20-2011 02:04 AM
Torque cylinder head EC 300 2009 Klausen Enduro Engine - 2 stroke 9 10-03-2010 10:49 AM
Cylinder Bolt Torque? eff Enduro Engine - 2 stroke 12 03-30-2008 08:44 AM




All times are GMT -5. The time now is 07:32 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org