Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-20-2007, 09:50 PM
coolum74 coolum74 is offline
Senior Member
 
Join Date: May 2007
Location: Sunshine Coast QLD, Australia
Posts: 155
Default 06 Fse 450

Hey, I recently bought my bike new and had problems when running it in due to the dealer leaving the transit plate in the airbox after pre delivery service. The mechanic, after telling me the plate should have been removed during the service told me that he adjusted the EFI because the bike seemed under powered at the time (probably due to restricted airflow). So, my question is....should the EFI be re-adjusted now that the airflow has changed and is there a way I can get a manual on how to change the required paramaters???? The Closest dealer to me is either 1100klm east or 2100klm south on the Sunny Coast.

The bike runs well but does tend to pop alot on de-acceleration and the owners manual says "contact your local Dealer".

Love the bike
Proud to be a GASGAS owner
Thankful for this website

Regards
__________________
Adam
2006 FSE450...Gone
2011 EC300e
Sunshine Coast, Queensland
Australia
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off





All times are GMT -5. The time now is 03:48 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org