|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Diameter of front wheel bearing?
Does anybody know the outer diameter and also the width of the bearings of the front wheel bearings in an 02 ec300?
Am fitting some different forks and the axel is a different size and rather than have a custom axel machined up, going to try a bearing supplier first and see if i can get some bearings to match both the 02 wheel and the new axel. Its either that or buy a wheel that will fit the axel from the doner bike of the forks. I can dismantle the wheel if nessecary but want to keep riding the bike while i sort out the new front end.
__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic. Now a 250cc. |
#2
|
||||
|
||||
I think you can get the dimensions off of the part number for the bearing. If you pull the wheel off, then the seal, you may be able to read it.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#3
|
|||
|
|||
I believe they are the same as my 2001 EC 200 correct?
If so, I can measure for you this evening. I have mine busted apart right now for a wheel rebuild and have yet to install the bearings. |
#4
|
||||
|
||||
Its ok took the wheel apart, and measured them anyway, but thanks for the offer!
__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic. Now a 250cc. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wheel bearing replacement | bchatt | Enduro Chassis & Body | 2 | 01-13-2011 08:37 PM |
Front wheel bearing life | roostafish | Enduro Chassis & Body | 11 | 12-27-2010 11:55 AM |
Front Wheel Bearing Removal | coolum74 | General Discussions & Announcements | 13 | 02-24-2009 03:29 PM |
05 250 front wheel bearing seal #??? | Bandit9 | Enduro Chassis & Body | 3 | 10-29-2007 06:49 PM |
Rear wheel bearing ? | ktmguy23 | Enduro Chassis & Body | 1 | 03-22-2007 06:45 AM |