Oil from header pipe?

yourmatedave · #1 05-24-2013, 04:24 AM

How much oil to people get coming from around their header pipes after say an hour riding?

andy176 · #2 05-24-2013, 04:54 AM

Quote:

Originally Posted by yourmatedave

How much oil to people get coming from around their header pipes after say an hour riding?

You shouldn't b getting any and if u are u need to replace the o rings sounds like there away.

yourmatedave · #3 05-24-2013, 05:31 AM

Thats what I thought, is it a copper one?

Jakobi · #4 05-24-2013, 05:37 AM

44x3mm Viton o-rings x 2 for the exhaust spigot. I like to seal it up with some high temp silicone as well. And if possible check that the pipe is sitting flush on the spigot.

Vindicator · #5 05-24-2013, 08:54 AM

Quote:

Originally Posted by Jakobi

44x3mm Viton o-rings x 2 for the exhaust spigot. I like to seal it up with some high temp silicone as well. And if possible check that the pipe is sitting flush on the spigot.

+1

I use the viton o-rings from a 07' KTM 300, fits like a golve

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Header tank level ...	Packman	Enduro Engine - 2 stroke	3	05-17-2013 03:37 PM
2011 XC250 header pipe replace??	redrider	Enduro Engine - 2 stroke	10	10-29-2011 12:05 AM
Will the 03-05 header work on an 01?	forgiven	Enduro Engine - 2 stroke	8	02-09-2011 04:23 PM