THE US Source for Top-End Kits ?

[AZRickD]

Time for a top-end job.

Who is the best supplier nowadaze ?

[webmaster]

Hall's Cycle. They have largest parts stock in U.S. Also centrally located in U.S. in Illinois (relative to shipping to either coast of U.S.). They have always invested heavily in their parts stock and have been a gasgas dealer for many, many years.

http://www.halls-cycles.com/

Alternatively - assuming you live in Arizona - your closest dealer would be moto city...

http://www.azmotocity.com/


jeff

[memphis2857]

And although I believe very firmly in supporting our dealers GasGas just uses Vertex Pistons so they are pretty easy to find


Sent from my iPad using Tapatalk

[pscook]

I have had great experience with Bob Piper at North Lake Tahoe Motorsports. I found him on ebay and have used him for OEM and aftermarket engine parts almost exclusively. Wossner pistons and all of the gaskets you would need. He takes requests, too, so you can ask for extra base gaskets, bearings, etc. He appears to have quite the stock, but I don't know if he is still a Gas Gas dealer since the restructure.

[Brian]

Originally Posted by pscook

I have had great experience with Bob Piper at North Lake Tahoe Motorsports. I found him on ebay and have used him for OEM and aftermarket engine parts almost exclusively. Wossner pistons and all of the gaskets you would need. He takes requests, too, so you can ask for extra base gaskets, bearings, etc. He appears to have quite the stock, but I don't know if he is still a Gas Gas dealer since the restructure.

I've been getting my top end kits from the same place. One item, one price everything you need to do the job. No forgetting to order a gasket etc..

[slocalspode]

Add me to the list, Bob is a straight up guy. Helped me out big time in the past.
Drove out of his way to deliver me a part that I needed while on a cross
country trip to Idaho. Saved my ride for sure.
Jeff

Originally Posted by pscook

I have had great experience with Bob Piper at North Lake Tahoe Motorsports. I found him on ebay and have used him for OEM and aftermarket engine parts almost exclusively. Wossner pistons and all of the gaskets you would need. He takes requests, too, so you can ask for extra base gaskets, bearings, etc. He appears to have quite the stock, but I don't know if he is still a Gas Gas dealer since the restructure.

[MNKeith]

Direct from Wossner. They're in CA.

http://www.wossnerpistons.com/

[AZRickD]

I told my dealer -- Moto City KTM/GG to go through Halls or North Lake Tahoe.

Vertex Pistons have done well for me. Actually, I haven't had problems with any make of piston I've placed in Gasser's.

I tend to avoid forged Pistons, though.