Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-02-2012, 01:28 PM
rootsnrocks rootsnrocks is offline
Member
 
Join Date: May 2012
Posts: 23
Default Voltage Regulator

I was hooking up lights on an 09 EC 250 that I purchased which appeared to have been previously lit up (wires for lights and brake light switch). The lights came on briefly then all the bulbs blew... Checked the voltage with a meter and when i rev'd the engine the voltage spiked to 18 V? I assume the voltage regulator must be bad or missing. I have the Race edition but I believe it came with a regulator. Can someone post a pic or tell me where the regulator is? I see what appears to be a CDI unit in the air box. Is the regulator on the frame somewhere?

Thanks.


Reply With Quote


  #2  
Old 07-02-2012, 03:39 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

I have a regulator under the tank at the neck of the frame on my 2002 XC300. It's a simple regulator, but it keeps everything AC. I bought a Trail Tech regulator/rectifier to install, I just haven't made time. Look in the crook of the neck under the tank for a small box with a couple of wires sticking out. One of the wires should be yellow, IIRC.
__________________
Phil
(New bike pending...)
Reply With Quote
  #3  
Old 07-02-2012, 07:02 PM
gasmonkey's Avatar
gasmonkey gasmonkey is offline
Bronze Level Site Supporter
 
Join Date: Dec 2008
Location: Waikato,NZ
Posts: 285
Default

Regulator is mounted with the coil ,under tank ,on frame right side.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
voltage regulator for 05 ec300 ktm300exc Enduro Electrical & Wiring 2 05-22-2010 03:26 PM
Voltage regulator sanderjavant Enduro Engine 4 stroke (including EFI & Exhaust) 3 09-22-2008 08:36 PM




All times are GMT -5. The time now is 08:33 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org