Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-24-2018, 08:26 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default Cilinder gasket kit 300 2018

Hi

Does any one know if a kit for a 2015 ec 300 would fit a ec 300 2018?

https://www.motocrosscenter.com/shop...25944101.html#

I'm starting to planing a piston change.

Regards.


Reply With Quote


  #2  
Old 10-24-2018, 06:08 PM
Wuzofoz Wuzofoz is offline
Member
 
Join Date: Oct 2018
Posts: 39
Default

I found this on eBay (item num 362081509427) so would guess yes a 15 base gasket will fit. I?m new to gasgas as well and just asked a similar question
Reply With Quote
  #3  
Old 12-04-2018, 02:55 AM
Smith-80 Smith-80 is offline
Member
 
Join Date: May 2018
Posts: 5
Default

Quote:
Originally Posted by eralha View Post
Hi

Does any one know if a kit for a 2015 ec 300 would fit a ec 300 2018?

https://www.motocrosscenter.com/shop...25944101.html#

I'm starting to planing a piston change.

Regards.
I have just received a gasket kit(genuine) from my dealer and have a metallic .5 gasket in it, I was looking for different gasket sizes so i could alter squish and port height. I would also be interested if the older gaskets fit so i can get a varied base gasket thickness.
Reply With Quote
  #4  
Old 12-04-2018, 03:55 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

I do not know, but I would be surprised if the older base gaskets doesn't fit the 18 and 19.
Edit: After checking the parts catalogs online, I see that both the 0.15mm and 0.30mm gaskets have the same part numbers for my 15 model and the 19 models. The 0.5mm gasket does not. I suppose that means there is a minor cahnge, but that older gaskets can be used?
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 XC 250 Base Gasket Jacob 'Berg Enduro Engine - 2 stroke 4 08-22-2018 03:01 PM
Top end gasket kit poelinca Enduro Engine - 2 stroke 20 06-11-2016 11:06 PM
07 gasket kit into a 09? lonetree Enduro Engine - 2 stroke 3 07-10-2014 12:14 PM
Gasket Set. Marki Enduro Engine - 2 stroke 3 12-02-2011 06:15 PM
Base Gasket gtsnowcrack Enduro Engine - 2 stroke 6 09-09-2006 05:43 AM




All times are GMT -5. The time now is 07:50 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org