Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-16-2017, 03:33 PM
welsh.Z.S. welsh.Z.S. is offline
Join Date: Oct 2016
Posts: 73
Default Basic idle setting ?

Changed my idle screw today from the crappy plastic one to the nice shiny easy adjustable one , is there a basic setting to go buy with the idle screw now so I can get a rough point to start from ? IE 1.5 turns out etc .. bike has a fresh top end etc so is nice and​ crisp
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Basic clutch question archangel.ahl@gmail.com Enduro Engine - 2 stroke 2 05-03-2017 06:46 PM
2004 300 ec idle setting ... Packman Enduro Intake/Carburetion - 2 stroke 4 08-15-2013 05:38 AM
ec 300 setting correct pilot jetting, idle low end hillbilly Enduro Intake/Carburetion - 2 stroke 5 07-08-2012 10:28 AM
Gas Gas EC 300 09 Basic Suspension Settings snaissidis Enduro Suspension 0 03-16-2009 04:05 PM
Basic Settings for 2005 DE250 the eel Enduro Suspension 1 09-02-2006 12:37 PM

All times are GMT -5. The time now is 09:10 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org