|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ranger Ec300 Jetting
Hi all, newbie here, just bought a 2019 Ranger, fantastic bike but,
Id like some info on jetting? Bike is standard, after running in for 400miles. Main jet 160 Pilot 35 As 1.0 PWK 36 CARB Needle has been changed to a NEDW, clip 2. Much better idle to 1/4 throttle opening but it seems to lack a bit up top compared to the stock N1EF needle which was also on clip 2. The stock needle was really spluttering at small/ part throttle, not smooth at all like my old 4 stroke 250. Tried a 165 main tonight, and it was missing at wot? Photo is from a ride on Sunday covering 50 miles of trials and lanes, with new NGK plug, last photo is from stock set-up with a Nippon plug. I also have an NEDG needle to try? Any ideas where to start guys? TIA Sea level, North Devon UK. Cheers Mark |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 vs Ranger | singletracker | General Discussions & Announcements | 27 | 09-18-2023 01:14 PM |
GasGas EC Ranger... | Davehuge | General Discussions & Announcements | 32 | 01-03-2020 02:41 AM |
GasGas Race Ranger 300 model is here | Keg | General Discussions & Announcements | 4 | 12-30-2019 12:23 PM |
Need advice on EC Ranger before buying one | Stewee64 | Enduro Intake/Carburetion - 2 stroke | 10 | 08-03-2019 11:59 PM |
Very Good Review on 2020 GasGas Ranger | Moto7man | Pictures & Videos | 0 | 07-10-2019 04:08 PM |