|
Enduro Product Announcements Announce new gasgas enduro products here - Vendors Welcome... |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Motard Chain guide
Trying out this chain guide from GasGas. It is suppose to come off a Motard version. Will keep you informed about how good it goes and service life.
__________________
"It's Nature that Brings out the Madness" GasGas FSR450 07' |
#2
|
|||
|
|||
nice.
do you have the gasgas part # for that?
|
#3
|
|||
|
|||
Yes I do.
The small bolts can be used from current chain railer and all you need to do is buy a couple of allen key bolts to bolt to swing arm. Here's the Part Numbers. BC250212028 - cross chain guide BC250221018 - cross chain guide support BC250412032 - chain guide plate
__________________
"It's Nature that Brings out the Madness" GasGas FSR450 07' |
#4
|
|||
|
|||
chain
dose this replace those poor chain rollers on all gagas ec
|
#5
|
|||
|
|||
Find out if your model chain roller uses the same part No. as mine. Then you know it will fit.
__________________
"It's Nature that Brings out the Madness" GasGas FSR450 07' |
#6
|
||||
|
||||
Thats also the mc chain guide . I have not had good success with them as the plastic part seems to break very easyl'y, could have something to do with the cooler climate up here
|
#7
|
|||
|
|||
I have since found out it is the MX chain guide. Down here in Australia the guide seems to be quite soft. We don't have really cold weather.
__________________
"It's Nature that Brings out the Madness" GasGas FSR450 07' |
#8
|
||||
|
||||
Hi, I'm just north of you. It looks like that guide would fit my 03 EC 250, how much did it cost you in OZ dollars? Is it quieter than the original?
|
#9
|
|||
|
|||
If you want something that is quiet running, you might want to consider the LTR chain guide setup - it is actually a bracket that allows you to use a heavy duty honda XR chain guide. The XR guide uses a hard slippery rubber for the "slider part" that cushions the chain and reduces chain slap/noise.
http://www.lt-racing.com/ltr_guide.html For what it's worth - I don't like aluminum wrapped chain guides - they bend when they take a hit - an all plastic guide bounces back into position. jeff |
#10
|
|||
|
|||
I have taken the guide off as it wears a little on the side, (uneven).
Will look at modding it or getting an LTR one sometime.
__________________
"It's Nature that Brings out the Madness" GasGas FSR450 07' |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chain Guide | coolum74 | General Discussions & Announcements | 9 | 10-18-2009 10:41 PM |
Chain Guide? | Boomhauer | Enduro Chassis & Body | 6 | 06-16-2009 09:29 PM |
Chain guide | Skidad | Enduro Chassis & Body | 5 | 10-24-2008 01:17 PM |
chain slider / chain guide crossover? | bondo | General Discussions & Announcements | 1 | 09-01-2008 09:13 PM |
chain guide set ups | skid jackson | General Discussions & Announcements | 10 | 07-31-2008 05:29 AM |