|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Yes to all above!
Reeds aren't the problem. Get the head clearances and compression setup. Get the float level in the carb nailed. Get the jetting specs ball park, and then dialled. I set my idles quite low so they tend to not idle very long in gear with clutch pulled. The drag pulls it down. In neutral she idles as long as I want. Been like that on my last 3 engines - 2010, 2012, and 2018. I chased the 2010 around in circles for a long time. 2.8mm of squish clearance made the engine behave very inconsistently. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
VForce 4 reeds | Wuzofoz | Enduro Intake/Carburetion - 2 stroke | 6 | 01-22-2020 07:11 PM |
Brand New VForce 3 replacement reeds | gasgasman | Parts | 0 | 12-25-2019 10:29 PM |
vforce 4 reeds on 2012 gasgas | chrille79 | Enduro Intake/Carburetion - 2 stroke | 4 | 10-17-2016 09:37 AM |
Vforce 3 reeds | candybuddy | Enduro Intake/Carburetion - 2 stroke | 1 | 08-03-2014 05:01 PM |
My motor is sick :( | Colemanian | Enduro Engine - 2 stroke | 9 | 06-02-2013 07:26 PM |