GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-12-2019, 02:27 AM
Dan Dan is offline
Member
 
Join Date: May 2019
Posts: 10
Default 2013 Ec250 wiring

Hi all. I?m hoping for a little bit of help if that?s possible. I recently bought the ec250 and I?m trying to figure out some of the wiring. It looks like a previous owner has stripped all switchgear and just taped all wires up basically Meaning none of the lights work. I wouldn?t mind being able to get these wired back up somehow but I?m wondering where they would originally have got power from.
Am I right I?m thinking that as it?s a kickstart only model it wouldn?t have been to a battery? If not does anybody know where else it needs wiring took? Thanks.


Reply With Quote


  #2  
Old 06-12-2019, 03:34 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,869
Default

You're in luck mate! I have a 2013 EC250R and just went through my harness to get the bike ready for sale.

Where are you located?

Do you have the switch block still?

First point of call is to check you have power on the yellow cable. Comes from the stator to run the lighting circuit. Few points along the harness you can probe.
Reply With Quote
  #3  
Old 06-12-2019, 04:37 AM
Dan Dan is offline
Member
 
Join Date: May 2019
Posts: 10
Default

Quote:
Originally Posted by Jakobi View Post
You're in luck mate! I have a 2013 EC250R and just went through my harness to get the bike ready for sale.

Where are you located?

Do you have the switch block still?

First point of call is to check you have power on the yellow cable. Comes from the stator to run the lighting circuit. Few points along the harness you can probe.
Hi I am in the uk. Unfortunately I have nothing other than the front light, rear light and kill switch. Oh and the map switch is still there too.
Reply With Quote
  #4  
Old 06-12-2019, 07:28 AM
Anders's Avatar
Anders Anders is online now
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 750
Default

The kickstart bikes came without a battery. The light runs off AC (I belive it still was like that in 13, although my 15 is different) and there should be a small regulator placed somewhere close to the coil. As Jacobi said, the yellow wire is your source of AC power.

Please have a look at https://gasgas.com/en/manuals?c=enduro&y=2013 there are the manuals. On pages 16-17 there are schematics. perhaps not the most accuirate, but useful anyway.
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #5  
Old 06-12-2019, 08:28 AM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is online now
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 154
Default

Have a chat with the UK importers. Www.trialendurodirect.com or www.gasgasuk.com.

They should know what yoh need. Speak to Andy in spares, he knows all there is to know.
Reply With Quote
  #6  
Old 06-12-2019, 08:29 AM
Dan Dan is offline
Member
 
Join Date: May 2019
Posts: 10
Default

Thank you both for your help I will have a look and see if I can find the power from the yellow power wire go from there!
Reply With Quote
  #7  
Old 06-12-2019, 09:40 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,869
Default

You'll need to source a switch block or splice something in..

I have an entire spare wiring loom here that I was given from a 2013 that upgraded to an e-start (different loom req to add battery etc).

In short, the yellow AC comes direct from the stator. Under the tank on the frame you'll have the CDI which connects into the loom, a regulator (small black box mounted to frame, and the coil.

Everything else then runs up around the head stem and has plugs for the headlight, blinkers, horn, etc. I can't recall from memory, but I think the flasher unit for the blinkers was also included in the switch block on this model. They aren't a cheap replacement.

This gives you an idea of the loom: https://www.motocrosscenter.com/shop...50-racing-2013

Ref. EE10000043012 costs 85 Euros...
Reply With Quote
  #8  
Old 06-12-2019, 12:28 PM
Dan Dan is offline
Member
 
Join Date: May 2019
Posts: 10
Default

Quote:
Originally Posted by Jakobi View Post
You'll need to source a switch block or splice something in..

I have an entire spare wiring loom here that I was given from a 2013 that upgraded to an e-start (different loom req to add battery etc).

In short, the yellow AC comes direct from the stator. Under the tank on the frame you'll have the CDI which connects into the loom, a regulator (small black box mounted to frame, and the coil.

Everything else then runs up around the head stem and has plugs for the headlight, blinkers, horn, etc. I can't recall from memory, but I think the flasher unit for the blinkers was also included in the switch block on this model. They aren't a cheap replacement.

This gives you an idea of the loom: https://www.motocrosscenter.com/shop...50-racing-2013

Ref. EE10000043012 costs 85 Euros...
Thank you for the info. I will have to pull it all apart over the weekend and see exactly what I do and don?t have in play still.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2005 EC250 Wiring jcs003 Enduro Electrical & Wiring 0 01-17-2018 12:32 PM
2011 EC250 Wiring harness wanted Motomecc Parts 0 11-14-2016 04:26 PM
2013 gas gas 300 xc wiring help chasedittrich Enduro Electrical & Wiring 0 10-07-2014 11:30 AM
2002 ec300 light wiring and speedo wiring help needed. andy176 Enduro Electrical & Wiring 0 02-04-2014 07:38 AM
2011 Ec250 wiring questions toolmaker General Discussions & Announcements 0 01-04-2011 07:38 AM




All times are GMT -5. The time now is 04:52 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org