Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-07-2014, 02:59 PM
Dkskioh Dkskioh is offline
Member
 
Join Date: Nov 2011
Posts: 13
Default 1997 EC250 No lights at all

Help! Just installed a new Trail Tech X-2 headlight on my 1997 EC250.. It worked great for about 15 seconds then all my lights stopped working. No running lights, no brake lights and no headlights. I happened to be monitoring the voltage input to my Trail Tech Voyager at the time and saw a spike of about 19 volts but then it went back to a normal input voltage. I think I may have had a short around the voltage regulator. I think I found the short where the wires coming out of the stator connect to the bike's wiring harness. Found two connectors melted together.
Before I get too far into this I thought I would ask if any of you have experience with this...
also I have 3 wires coming out of my stator, 2 yellows and a red. One of the yellows was cut and left unattached by the previous owner is that a problem? Thanks.
DM

Last edited by Dkskioh; 09-07-2014 at 04:26 PM.
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1997 EC250 new plastic Dave Massingham Enduro Chassis & Body 1 01-03-2013 01:57 PM
1997 ec250 desertgasser300 Pictures & Videos 6 03-20-2011 09:39 PM
1997 EC250 Plastics? SS109 Enduro Chassis & Body 5 01-12-2011 07:56 PM




All times are GMT -5. The time now is 07:27 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org