Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-18-2011, 01:16 PM
PEB PEB is offline
Senior Member
 
Join Date: Aug 2006
Posts: 1,152
Default 05 engine in a 07 frame

Any issues with this swap? Seems like it should be straightforward. Also is the 250 ignition different than the 300, or the 200?


Reply With Quote


  #2  
Old 10-18-2011, 03:02 PM
forgiven forgiven is offline
Senior Member
 
Join Date: Jan 2009
Location: Ottawa Illinois
Posts: 595
Default

Different subframe so the exhaust may be tricky.
Reply With Quote
  #3  
Old 10-18-2011, 08:11 PM
Berkyboy's Avatar
Berkyboy Berkyboy is offline
Site Sponsor
 
Join Date: Jul 2006
Location: Minnesota
Posts: 553
Default

The motor will bolt right in. Ignitions should be the same as well (250 to 300). Most of the '05 GasGas bikes that made it into the US had the "Hi-lo" ignition even though it officially didn't make it into the line up until '06. The only thing missing was the "hi-lo" switch.
__________________
Steve Berkner

I've attended 21 Six Days as a working Photojournalist
Reply With Quote
  #4  
Old 10-18-2011, 08:55 PM
PEB PEB is offline
Senior Member
 
Join Date: Aug 2006
Posts: 1,152
Default

Perfect! Now we need a 05+ motor.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
EC/ EC-FSR frame HenrikSchmidt Enduro Chassis & Body 2 05-31-2011 05:32 AM
2002 frame; same as a 2005 frame, or close enough? Trooper Sam Enduro Chassis & Body 0 06-10-2010 09:18 AM
An 01 GG 300 engine in an 04 GG 200 or 300 frame? prentice Enduro Engine - 2 stroke 5 02-07-2008 12:07 PM
Engine mounts on to frame west aussie gas 450 Australia & New Zealand 3 01-28-2007 08:16 PM
engine mounts on to frame west aussie gas 450 Enduro Engine 4 stroke (including EFI & Exhaust) 1 10-26-2006 08:59 AM




All times are GMT -5. The time now is 12:39 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org