#11
|
||||
|
||||
Ok it's a 30mm wide block butted against the triple as it flares up against the tube.
It's about 33mmthe other way but that's not so critical. Tig with lots of heat in the part first. Don't need to go crazy. Bolted it from below, it turned out to be easy even by hand. Made my first parts out of plastic to get it right and then just replicated in ally.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#12
|
|||
|
|||
Don't want to know what you're holding on to...
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#13
|
||||
|
||||
Haha.
My sanity. By a thread.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#14
|
|||
|
|||
I've decided I'm going to go with the head stop mounted tang style one. I will make a program and cut it on the wire cutter tomorrow at work, and then grind down what is required after fitment.
Separate point. Using 20x42x12mm bearings, I'm measuring 22mm disc side and 18mm to get the wheel centered. This is measuring the difference from the fork leg to the side of the rim. Sound about right?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#15
|
||||
|
||||
In my thread I think I used 22mm on both sides ultimately.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#16
|
|||
|
|||
Interesting. I'm wondering if the spindle I've got it from a different year or something, as a fair amount pokes out of the non disc side leg even though the threaded end is out up to the shoulder... Hrmm!
What are you doing about dust seals? Looks like I've got about 4mm on one side and 5mm on the other, thinnest seals are 6mm, just let em hang out?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 Last edited by motopsycho87; 08-02-2018 at 08:41 AM. |
#17
|
||||
|
||||
Let it all hang out baby!
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#18
|
|||
|
|||
Wire cutter was busy so I ground a block by hand. Made spacer sets for both front wheels. Looking forward to the weekend
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#19
|
|||
|
|||
Most pleased with the spacers anyway!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#20
|
|||
|
|||
Ran out of gas half way, but she'll hold. 35mm wide at 50mm from centre of stem.
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gas gas sm250 steering lock | Niall-griffiths | Enduro Chassis & Body | 7 | 09-24-2014 06:40 PM |
Steering lock bolts necessary? | Bandit9 | Enduro Chassis & Body | 10 | 10-21-2013 08:25 PM |
Steering lock removal | schlitzy | Enduro Chassis & Body | 7 | 03-08-2013 09:20 PM |
Steering lock removal | Fred1956 | General Discussions & Announcements | 10 | 02-16-2011 02:37 PM |
where can i get new steering lock keys | mountain thumper | General Discussions & Announcements | 5 | 06-25-2008 10:53 AM |