and then this thing broke....

[dank]

ok i need a new throttle cable for my 03 ec250. one that is at least 2 inches longer than stock. were can i find one of those? also, i am considering getting the ltr jetting kit from go faster, and i was wondering what slide i should have, and any jetting data from that kit that anyone has for my bike.
any help would be much appreciated!
thanks
dan.

[Skidad]

I think Go Fasters has the longer cable or try Smiths Powersports in PA which I'm sure will have it.

I would go with the JD Jetting jet kit personally which works well. The LTR needle is I believe just a CEK which if you want you can get from Sudco. Might want to get a CCK as well while your at it.

Dank, where are you located? Update your profile so it shows.

[dank]

Im from pelican rapids minnesota. and the guy ill be riding with said that i might be able to use a honda cable, he has a ktm 250 and he replaced his with the honda part and said that it was built alot better and was about 4 inches longer. i put pestrana fmx protaper bars on and there about an inch and a half taller, so whenever i turn right the engine winds way up. im new to bikes so that is a very very bad thing.