|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Frames 2012 and 2013
On the 2012 there are slots is the side frame, you don't see them on the 2013 are they just covered up with the frame protectors.
__________________
13 GasGas 300XC, CLake and now Rekluse 17 Beta 430 RRS, Clake 19 Vertigo 300 03 H-D Nightrain www.newoodsriders.com You Can't Out Run Death Forever But You Can Make the BASTARD Work For It! Enjoy Life, Have Fun and Play Hard |
#2
|
||||
|
||||
Yep. Note of caution - the leading edge of the frame guard is very pointy at the top. Like pierce your flesh pointy.
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters Last edited by twowheels; 11-12-2012 at 10:33 AM. Reason: spelling |
#3
|
||||
|
||||
does the 2013 frame protector's fit the 2012 bike that only came with "stickers" to protect the frame..
__________________
Henrik Schmidt Faster, Faster!! Until the Thrill of Speed, Overcomes the Fear of Death.. Team YamaGas Racing. http://bricksite.com/teamyamagasracing |
#4
|
||||
|
||||
Yes, get on the list with your importer.
|
#5
|
||||
|
||||
What list?
My Importer? He won't even get me spareparts.. Wish I was in the US.. or just anywhere else than here in Denmark.. I need to mail order all my spares from UK, Germany or Spain.. And I can't find the part numbers for the '13 frame protectors..
__________________
Henrik Schmidt Faster, Faster!! Until the Thrill of Speed, Overcomes the Fear of Death.. Team YamaGas Racing. http://bricksite.com/teamyamagasracing |
#6
|
||||
|
||||
Thats what I though but wanted to know. Twowheels do you have the frame guard.
__________________
13 GasGas 300XC, CLake and now Rekluse 17 Beta 430 RRS, Clake 19 Vertigo 300 03 H-D Nightrain www.newoodsriders.com You Can't Out Run Death Forever But You Can Make the BASTARD Work For It! Enjoy Life, Have Fun and Play Hard |
#7
|
|||
|
|||
Quote:
Just a side note, when you get here and we go ride I am "Off Duty"! J/K I will stablize you long enough for you to see the outrageous helicopter bill for flying you out!!!! |
#8
|
||||
|
||||
On my 06 200 the clamp around the splined shaft broke. I replaced the complete kickstart lever with one of the new design. I expect the new kick start lever to last a long as the rest of the bike. I had to grind the inner diameter of the plastic frameguard somewhat to be sure that the lever returns to th upright position every time I kick it.
Sent from my OMNIA7 using Board Express
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#9
|
||||
|
||||
I'm inclined to think that some, not all, of these are due to people "slap kicking" the bike, you know kicking it hard before the ratchet is engaged. Doesn't do the starter parts any good either. My biggest issue with the older starters was the lack of a sealed knuckle and faster wear.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question on frames. | HuskyDude | General Discussions & Announcements | 9 | 10-18-2014 11:28 PM |
New 2012 or wait for 2013 | Diggs345 | General Discussions & Announcements | 76 | 06-25-2012 05:32 PM |
skid plate & rad frames | motodave63 | Enduro Product Announcements | 2 | 05-02-2009 10:37 AM |