Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-25-2019, 06:15 AM
Doc Brown Doc Brown is offline
Senior Member
 
Join Date: Dec 2017
Location: Austria, Europe
Posts: 586
Default

Quote:
Originally Posted by barossi73 View Post
Hey it is only a 200! Lol
But heres a good starting point,
pilot 40,main 175,suzuki needle NECH #3,0-500m NZ
Needles are $20
NEDH will give you a half clip leaner (#2) or richer (#3) if your altitude/humidity is different
This! And if it doesn't react to a fully closed AS, whatever pilot jet is in there, it's time to take the carb out. Clean it thoroughly, check float height and needle valve then put everything together with above mentioned jetting. Set AS to 1.5 turns out as a starting point. Ride and see what it does.

It will never bee a torque monster though.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
needle positions cause and effect question britishgas Enduro Intake/Carburetion - 2 stroke 4 06-12-2014 08:26 PM
Carb adjustment screw Hicksi Enduro Intake/Carburetion - 2 stroke 5 10-04-2011 11:42 PM
No Yel/Blu wire effect. cal_tony Enduro Engine 4 stroke (including EFI & Exhaust) 8 01-12-2009 10:29 AM
Elliminating 'Flywheel effect' on my EC 300 FFRDave Enduro Engine - 2 stroke 4 03-07-2008 09:30 PM
Supermotard 250 idle screw effect JonnySM250 Enduro Intake/Carburetion - 2 stroke 2 09-10-2007 12:23 PM




All times are GMT -5. The time now is 07:09 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org