GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.

Thread Tools Display Modes
Old 11-08-2018, 07:14 AM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Join Date: Oct 2018
Posts: 47

I can recommend heavy duty velcro strip. It is self adhesive and is very good at absorbing vibration. I use the 2 inch wide version and cover the whole of the flat area from directly below the light lens.

Trim the tape to the shape of the mudguard, offer up the plate and trace around to match and apply the opposing velcro to the plate back. Cross lay the 2 sections, ie top to bottom on one and left to right on the other. It grips very strongly and it stop you pulling the velcro off the mudguard or plate.

A 2" x 4" patch is rated as being able to hold 15 lbs. If you do crash, it will detatch on impact rather than breaking the plate and you can just press it back on. Any dirt build up can be brushed off with a stiff brush to restore the grip strength.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas Gas Motos License Plate & Frames Rod Overstreet Enduro Product Announcements 0 08-10-2015 09:00 AM
Gas Gas logo stickers/license plate frames motorhead General Discussions & Announcements 6 12-05-2011 06:09 PM
Plating (license, not chrome) Thread twowheels Suggestion Box 5 09-06-2010 04:43 PM
License Plate in Washington HydroDog Western United States 13 10-12-2007 10:25 PM

All times are GMT -5. The time now is 06:51 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 -