Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-08-2020, 08:08 PM
Banditpowdercoat Banditpowdercoat is offline
Member
 
Join Date: Mar 2019
Posts: 51
Default Power valve spacers

I have a CNC mill at home and wondering on the power valve spacers. Do people still use/need? I have made for my 98. 250. Not many other gg owners here I. Western Canada but if there's a want, I can make.




Sent from my iPhone using Tapatalk


Reply With Quote


  #2  
Old 08-09-2020, 02:31 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

You could make some for the other side too to get rid of that silly 5mm cardboard gasket.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #3  
Old 08-09-2020, 11:22 AM
Banditpowdercoat Banditpowdercoat is offline
Member
 
Join Date: Mar 2019
Posts: 51
Default

Quote:
Originally Posted by Gasser Nate View Post
You could make some for the other side too to get rid of that silly 5mm cardboard gasket.
5mm gasket? On the linkage side? My 98 is just a regular gasket on the linkage cover.
Have you a pic?
Reply With Quote
  #4  
Old 08-09-2020, 06:39 PM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,418
Default

If you really want a challenge there may be owners of 2011-2014 estart models who would like a spacer that incorporates the starter motor mount. The spacer might have to project out beside the starter motor to achieve the required volume.
Attached Images
File Type: jpg Cover.jpg (124.4 KB, 39 views)
__________________
2011 EC250E
Reply With Quote
  #5  
Old 08-09-2020, 07:34 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by Banditpowdercoat View Post
5mm gasket? On the linkage side? My 98 is just a regular gasket on the linkage cover.
Have you a pic?
Same shape. The 2018 model they changed the linkage so the cover requires more clearance.
Reply With Quote
  #6  
Old 08-10-2020, 01:59 AM
Nocams Nocams is offline
Member
 
Join Date: Feb 2016
Posts: 83
Default

2015 > requires the thicker gasket to clear the ball joint actuated bellcrank.

I?ve been using 6mm Delrin for years as the spacer.
__________________
2011 TXT300R
2018 EC300GP
Reply With Quote
  #7  
Old 08-11-2020, 08:42 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

Quote:
Originally Posted by Nocams View Post
2015 > requires the thicker gasket to clear the ball joint actuated bellcrank.

I?ve been using 6mm Delrin for years as the spacer.
I took a educated guess at the thickness! Save me an off cut will you?
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #8  
Old 08-13-2020, 09:26 AM
Nocams Nocams is offline
Member
 
Join Date: Feb 2016
Posts: 83
Default

I?ll even make it for you matey!

How?s the carcass going? You healed yet?
__________________
2011 TXT300R
2018 EC300GP
Reply With Quote
  #9  
Old 08-13-2020, 02:11 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

Quote:
Originally Posted by Nocams View Post
I?ll even make it for you matey!

How?s the carcass going? You healed yet?
Cheers bud! 🤘
Yep all good to go when I get some time off!
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #10  
Old 08-15-2020, 05:36 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

You two a good fellas! I'll have a beer for each of you after a good ride today!~
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power valve viper77765 Enduro Engine - 2 stroke 11 03-11-2019 09:56 AM
Ec 300 power valve Jonisaacson17 Enduro Engine - 2 stroke 11 07-18-2016 09:01 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 09:56 AM
power valve nut bonkeye Enduro Engine - 2 stroke 4 10-11-2012 06:40 PM
Power valve bens25au Enduro Engine - 2 stroke 2 02-09-2008 11:02 PM




All times are GMT -5. The time now is 04:16 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org