Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-01-2019, 06:56 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default EC 300 2018 Starter motor question

Hi,

Is the starter motor on a 2018 300 the same as a KTM 2008-2016?

https://pt.aliexpress.com/item/40000...c008mLz9Z&mp=1

It seems to me.


Reply With Quote


  #2  
Old 10-01-2019, 07:01 AM
Nocams Nocams is offline
Member
 
Join Date: Feb 2016
Posts: 83
Default

Yep,350watts for the early ktm, then 2014 they went to the 415w unit.
__________________
2011 TXT300R
2018 EC300GP
Reply With Quote
  #3  
Old 10-01-2019, 07:33 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default

Quote:
Originally Posted by Nocams View Post
Yep,350watts for the early ktm, then 2014 they went to the 415w unit.
Do you know witch one does the gasgas have?
Reply With Quote
  #4  
Old 10-01-2019, 07:02 PM
Nocams Nocams is offline
Member
 
Join Date: Feb 2016
Posts: 83
Default

415watt mate.
__________________
2011 TXT300R
2018 EC300GP
Reply With Quote
  #5  
Old 10-01-2019, 11:59 PM
TGM_OFFROAD TGM_OFFROAD is offline
Senior Member
 
Join Date: Aug 2019
Posts: 117
Default

Quote:
Originally Posted by eralha View Post
Hi,

Is the starter motor on a 2018 300 the same as a KTM 2008-2016?

https://pt.aliexpress.com/item/40000...c008mLz9Z&mp=1

It seems to me.
It bolts right up but spins in the opposite direction. You will need to take the motor apart and spin the center body 180 degrees.
Reply With Quote
  #6  
Old 10-03-2019, 04:45 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default

Quote:
Originally Posted by TGM_OFFROAD View Post
It bolts right up but spins in the opposite direction. You will need to take the motor apart and spin the center body 180 degrees.
Thanks for the info!
Reply With Quote
  #7  
Old 10-03-2019, 08:16 PM
farmerj's Avatar
farmerj farmerj is offline
Platinum Level Site Supporter
 
Join Date: Dec 2007
Location: Salem, OR
Posts: 361
Default

Quote:
Originally Posted by TGM_OFFROAD View Post
It bolts right up but spins in the opposite direction. You will need to take the motor apart and spin the center body 180 degrees.
But you don't need to pull the end caps off, is that right TGM? Just loosen the bolts a little bit and spin the center body. I took the whole thing apart - pulled the end caps off and the winding out - and then it was very hard to get the brushes back in place.

Jeff
__________________
'18 GG XC 300
'05 GG DE 300
'01 GG txt 321

Last edited by farmerj; 10-03-2019 at 11:21 PM.
Reply With Quote
  #8  
Old 10-03-2019, 11:09 PM
TGM_OFFROAD TGM_OFFROAD is offline
Senior Member
 
Join Date: Aug 2019
Posts: 117
Default

Quote:
Originally Posted by farmerj View Post
But you don?t need to pull the end caps off, is that right TGM? Just loosen the bolts a little bit and spin the center body. I took the whole thing apart - pulled the end caps off and the winding out - and then it was very hard to get the brushes back in place.

Jeff
I have only done it once but when I did it the back portion was in the center body very tightly, it would not have been possible to spin without taking apart. Yes it was a bit difficult to reassemble but not horrible. Luckily I have long fingers.
Reply With Quote
  #9  
Old 10-04-2019, 05:14 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default

Quote:
Originally Posted by farmerj View Post
But you don't need to pull the end caps off, is that right TGM? Just loosen the bolts a little bit and spin the center body. I took the whole thing apart - pulled the end caps off and the winding out - and then it was very hard to get the brushes back in place.

Jeff
Thanks for this valuable advice, still waiting on the parts.
Reply With Quote
  #10  
Old 10-08-2020, 07:50 AM
Iakovos1 Iakovos1 is offline
Member
 
Join Date: Mar 2019
Posts: 25
Default

Quote:
Originally Posted by TGM_OFFROAD View Post
It bolts right up but spins in the opposite direction. You will need to take the motor apart and spin the center body 180 degrees.
Hello TGM can you confirm the direction the GG motor is supposed to turn. My understanding if GG spins CCW and KTM spins CW. is that correct?
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Starter (Motor) Question farmerj Enduro Electrical & Wiring 8 10-19-2020 01:25 AM
EC 300 2018 Starter motor eralha Enduro Engine - 2 stroke 6 08-06-2019 05:06 AM
Starter motor mikethebike1127 Enduro Electrical & Wiring 2 12-09-2017 06:48 PM
starter motor pigpen966 Enduro Electrical & Wiring 1 08-30-2016 01:56 PM
04 starter motor pondmore Enduro Engine 4 stroke (including EFI & Exhaust) 2 06-23-2007 04:56 AM




All times are GMT -5. The time now is 09:21 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org