|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Jetting changes after RB Head Mod?
I've just completed both a top-end job and an RB head mod last week.
I asked Ron if I should expect the possibility of leaner jetting for my 05DE250. He said it's a possibility. What are others' experience with post head-mod jetting changes? |
#2
|
||||
|
||||
rick, went from a 172 to a 168 and I beleive I might try a little leaner. The plug is a little black still. Running a ltr needle 2nd notch from the top and a 40 pilot. I just ordered a # 7 slide as there is a # 5 in there now.Going to the bradshaws on thursday for some mean mule trails if your up.
|
#3
|
|||
|
|||
I think I could probably go down to a 162/40 from my 165/40 up in Flagstaff. When we climb up to 9k feet and/or the filter begins to get clogged with silt, it starts to burble rich on top.
As for those Bradshaw trails, I try to keep me and my bike from getting all beat up, you savage !!! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question: LTR Jetting an MC High comp head | Ryno | Enduro Intake/Carburetion - 2 stroke | 8 | 02-20-2007 02:22 PM |