|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
2003 400 FSE WP Forks
I'm in the middle of stripping my forks to replace the seals and have got a different number of nylon spacers between the 2 fork legs.
The RHS has 1x9mm spacer and 1 x2.5 mm spacer between the fork cap and the spring. The LHS has 2 x 2.5mm spacers and 1x 1.5mm spacer So, apart from one fork having 3 spacers and the other only 2, the combined height of the RHS is 3-4mm higher than the LHS! Is this as WP intended? The parts fiche quotes all three sizes of spacer which I assume is for different preload, but I'm guessing that both forks should be the same! Any insight would be great Cheers Luke
__________________
2006 Triumph Daytona 675 2004 Gas Gas 400 FSE |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
43 mm wp forks. | jhendr3702 | Enduro Suspension | 4 | 10-18-2010 06:46 PM |
forks | sen480 | General Discussions & Announcements | 1 | 03-25-2010 04:54 AM |
which forks have i got?! | tommo | Enduro Suspension | 3 | 12-29-2009 02:53 PM |