Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-02-2015, 04:31 PM
smitten smitten is offline
Member
 
Join Date: Jan 2015
Posts: 31
Default GasGas 300EC 2011 keep stalling without choke

Hi,

after about 15min of riding, my bike stall. It sound like something wrong in a the carburetor. After a couple of try to start the engine, it finally started and stall again after 1 min. keep doing that a couple of time until I can't started the bike anymore. I decided to turn On the choke and give a try and the bike started. I was able to get home with the choke On, but as soon as turn off the choke, bike stall.

Any idea what could be the problem?

Thanks


Reply With Quote


  #2  
Old 08-02-2015, 05:40 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

Drop the float bowl and see if the pilot jet is plugged.
Reply With Quote
  #3  
Old 08-02-2015, 07:06 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by Zman View Post
Drop the float bowl and see if the pilot jet is plugged.
That's my first thought too!
Reply With Quote
  #4  
Old 08-02-2015, 07:28 PM
smitten smitten is offline
Member
 
Join Date: Jan 2015
Posts: 31
Default

Thanks guys. I will try that tomorrow and let you know. I have to look on-line, never done this before.

Cheers
Reply With Quote
  #5  
Old 08-03-2015, 01:57 AM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,336
Default

are you still using the cable choke? If so make sure that it is not engaging by mistake
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #6  
Old 08-03-2015, 09:02 AM
smitten smitten is offline
Member
 
Join Date: Jan 2015
Posts: 31
Default

Quote:
Originally Posted by swazi_matt View Post
are you still using the cable choke? If so make sure that it is not engaging by mistake
Not sure. Here a picture of my carburetor. Where is the white narrow, I looked under the black protector and the washer is loose. I don't know if it related with my problem.


https://whatimg.com/i/pfkULU.jpg
Reply With Quote
  #7  
Old 08-03-2015, 04:48 PM
GGRider01 GGRider01 is offline
Senior Member
 
Join Date: Jun 2015
Posts: 483
Default

That link gives error 403. Try imgur.com
Reply With Quote
  #8  
Old 08-03-2015, 07:18 PM
smitten smitten is offline
Member
 
Join Date: Jan 2015
Posts: 31
Talking

Quote:
Originally Posted by GGRider01 View Post
That link gives error 403. Try imgur.com
Cut and past in your browser. I think the forum do this error.

Anyway, I want to say thank you to all of you for your support . I removed the Pilot jet and I think there was a little piece of dirt inside. Its hard to say because the hole is so small. After I blow in the pilot jet, the hole seems to be a bit bigger. I went for a 30 min ride and the bike runs like new.

I can go riding tomorrow.

Cheers
Reply With Quote
  #9  
Old 08-08-2015, 11:59 PM
GGRider01 GGRider01 is offline
Senior Member
 
Join Date: Jun 2015
Posts: 483
Default

The white arrow is pointing at the throttle cable.. If something is loose under the rubber sheath there I would tighten it. I doubt it is your problem though.

The choke knob is not cable operated from what I see in the picture.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 GasGas 300ec Race jmille8651 Used Bikes 3 04-24-2015 04:34 PM
More Parts from my 2011 300EC iamovru Parts 3 09-16-2014 08:39 PM
2011 300EC Gas Gas Parts for Sale iamovru Parts 8 09-15-2014 03:24 PM
2011 300EC Jetting 400exc Enduro Intake/Carburetion - 2 stroke 7 04-04-2013 05:36 PM




All times are GMT -5. The time now is 02:18 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org