|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
I am contemplating swapping a set of YZ KYBs into my 2010 EC250. Any ideas if the YZ steering stem is compatible with the GasGas steering head? I'd assume at least a bearing swap will be required.
|
#12
|
||||
|
||||
Quote:
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#13
|
|||
|
|||
what i did with mine was got a second top t-clamp and had it machined out by a mm or 2.
I also retained the GG wheel by getting special spacers made to accept the yz axle I believe all balls has a bearing conversion kit if you want to use a full yz front end
__________________
2003 txt250 Pro 2013 Ossa 280i |
#14
|
|||
|
|||
I have a 2006 KYB SSS fork in the original gasgas tripple clamps. I machines them as well. I put the original gasgas wheel with special made spacers in fits without problems
Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
fork clamp bolts and fork oil level | gassergrant | Enduro Suspension | 2 | 02-16-2016 04:08 PM |
not all 5 wt fork oil is the same! | matt_tidball | Enduro Suspension | 3 | 04-25-2012 06:21 AM |
Fork oil?????????? | Wicitup | Enduro Suspension | 3 | 02-15-2012 10:53 PM |
fork seal change sachs fork | Madhead | Enduro Suspension | 13 | 01-13-2012 07:49 PM |
LTR fork Oil | PEB | Enduro Suspension | 5 | 09-10-2008 08:07 AM |