GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Old 12-15-2019, 12:48 PM
Doc Brown Doc Brown is offline
Senior Member
Join Date: Dec 2017
Location: Austria, Europe
Posts: 352

For those who are interested, that is what I found when I opened the engine today:

Although the dealer said he has replaced the nut I found the OEM nut without the cuts in its edges. No Loctite.

And that'ts the nut I fitted with Loctite and torqued to 80NM

Blocking the gears between clutch and crank with a 5 Eurocent coin worked very well. The coin was bent afterwards :-)

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
KYB technical touch USA website GG221 Enduro Suspension 0 06-14-2019 09:03 PM
Post your hard technical trails here hawaiidirtrider Pictures & Videos 29 05-11-2013 01:07 AM
Please use the Technical Forums for specific questions MattR General Discussions & Announcements 1 01-14-2008 08:24 PM
Website/bulletin board downtime possible. webmaster General Discussions & Announcements 0 12-14-2006 04:56 PM
Bulletin Board Upgrade... webmaster General Discussions & Announcements 0 08-27-2006 10:46 PM

All times are GMT -5. The time now is 06:07 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 -