|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
2009 ec300 sachs suspenders
Hi all
I had chance to try my new bike for a short time yesterday over some rough whoopy ground and initial impressions are that it is set up very hard ,mif i was young a fit and riding it in motox maybee not so bad , but im 44 and not so fit due to being off a bike for two years. Is it worth replacing the saches shock for an gas gas ohlins damper or just get the saches shock revalved along with the forks. We have a guy who works for the gas gas team called steve plain who iv heard good things about. Any advice would be much appriciated. Chris |
#2
|
||||
|
||||
The Sachs shock is fine, it has two known problems, the energizer o ring under the piston band can be too small and wear quickly causing blow by and loss of damping and the ball bearing check valve can 'moan'. Both have easy fixes detailed in many threads. My bike and other also have squeaky shocks which I'm near certain are the seal, just sounds bad.
As for action, it is a good as you'll gt once set up correctly, I use a racetech gold valve and valving, mainly for the new piston band setup. A revalve and it should be great.
__________________
Oz Current. 2015 ec300r estart, 98 RM 125 2013 Ec300r 2011 Ec300e 2009 Husky TE310 1982 XR500 Honda 1981 KE100 Kawasaki 1978 GT80 Yamaha |
#3
|
||||
|
||||
Thanks , so your saying just revalve the sachs and dont go for a ohlins rear .
Chris |
#4
|
||||
|
||||
Yep, it's actually good quality steel bodied with good tolerances. Cheers.
__________________
Oz Current. 2015 ec300r estart, 98 RM 125 2013 Ec300r 2011 Ec300e 2009 Husky TE310 1982 XR500 Honda 1981 KE100 Kawasaki 1978 GT80 Yamaha |
#5
|
|||
|
|||
I am guessing that the previous owner did a revalve on the forks. You normaly only notice the rear once the forks have been fixed
__________________
2003 txt250 Pro 2013 Ossa 280i |
#6
|
||||
|
||||
If the tuner is good he will update the shock with the correct parts. Once this is done and its sprung/valved for you its as good as an Ohlins.
|
#7
|
||||
|
||||
Quote:
Chris |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2009 SACHS Shock Question | 300XCRider | Enduro Suspension | 4 | 02-16-2011 07:59 PM |
Nabotin EC300 Replica 2009 | cladoo | Enduro Product Announcements | 7 | 02-08-2009 06:23 PM |