|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
2011 EC Wiring Route
Hi all,
Could anyone share some photos of the wiring route on a 2011 EC? Trying to work the wiring around where the fuel tank sits, but also where the main loom joins the lightswitch and headlight etc. Cheers Chris |
#2
|
|||
|
|||
Not exactly stock wiring, but should give you a general idea.
__________________
2011 EC250E |
#3
|
|||
|
|||
Thanks Neil, that's a great start! You've got A LOT more wires at the headlight area than mine, maybe because mine is non estart and has no turn signals?
Any chance you have a photo of the wiring from the stator going to the CDI and how it loops around the tank? My loom (a new GG replacement one) seems really short. Cheers Chris |
#4
|
|||
|
|||
The extra wiring is for a Trailtech Voyager and a pair of LED lights with a dimmer module. The pictures show the stator wiring going up along the clutch cable, turning back and going across behind the top shock mount. Then making a sharp turn through the right side wiring channel in the airbox. The CDI wiring actually goes through first so it is hidden behind the other wiring. The same is true when it crosses behind the shock; it is below the vent hoses.
__________________
2011 EC250E |
#5
|
|||
|
|||
Awesome that's exactly what I need, thanks dude!!!
Chris |
#6
|
|||
|
|||
This is helpful for me too. I not have the same setup as you but have been trying to redo a botched wiring job on a 2011 ec250. I cant for the life of me figure it out. Only last week did i realize there is a high and low beam switch that missing.
|
#7
|
||||
|
||||
Not to mention the Medium beam switch on the unit itself.
Did you look?
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
In search of: EC 300 2010 - 2011 wiring loom | mmarco78 | Parts | 0 | 06-25-2020 10:39 AM |
Help on how to route 400 fse throttle body hoses | jason r | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 05-01-2020 02:20 PM |
Route Sheet Holder - Designed to last | lneil06 | Parts | 6 | 06-19-2017 02:19 PM |
2011 EC250 Wiring harness wanted | Motomecc | Parts | 0 | 11-14-2016 04:26 PM |
2011 Ec250 wiring questions | toolmaker | General Discussions & Announcements | 0 | 01-04-2011 07:38 AM |