Sprocket size for 2011 6days 300?

[redrider]

Went to a 50T from 48 on my 250 and love it. Considering a 49 or a 50 for my 300. Any suggestions?

[gasser]

Here is a cheap way to try a steel 49 tooth rear. $19.99 at Rocky Mountain. I ran one on my 300 gasser and it fit perfectly.
http://www.rockymountainatvmc.com/pr...=&sizeAttr=484

[Jakobi]

Originally Posted by redrider

Went to a 50T from 48 on my 250 and love it. Considering a 49 or a 50 for my 300. Any suggestions?

Made the move from the 48 to the 50T on my 2010 300. Its nice. I found I don't need to be moving back to 1st as often in the tight stuff, or abusing the clutch so bad in the really tight stuff, but most of all I noticed it just lets the bike keep on singing a bit more easily. With the 48 if you didn't change right at the top end you'd kind of drop off the pipe a bit.

[redrider]

Ordered the 50 Ironman. If not happy it will be a spare for the 250 and I'll try a 49.