My kick start assembly cross over.

[Diddel]

I found when riding one time a kick start assembly off what appears to be some Yamaha which fits the spline on the kick start shaft of my 06 EC 300.
Far better design than stock but larger in the body so I had and cut away some of the frame guard plastic.

My question is does anyone know which one this would be off as I need to replace the piece which mounts the spline and the lever pivots around.

[Diddel]

[jostby]

http://www.gasgasrider.org/html/parts_crossover.html

[Eric K]

That looks quite different from the YZ kick start lever I have on my '06 EC300.

[stainlesscycle]

looks very ktm-ish to me. i don't think that's yamaha - here's pics of the yz one..

http://www.gasgasons.com/index.php?s...ic&staticID=78

and

http://embarrados.com/gasgas/viewtop...65d7940576057d

[Brian]

Looks like a kickstarter off a YZ 125 to me.

[stainlesscycle]

which year yz125? the yz125 kickers i see are a round shaft - the pics make it look like a squarish shaft..

[jhendr3702]

the yz one listed in the parts cross over is this one... it works great..
I have had a few yz125's, but i don't remember the kickers looking like that either...

[Brian]

Took me a while to figure out what you guys were talking about. (square peg round hole?)... But yes the lever is rounded on the 125 didn't see that at first.