|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rear wheel nut
Can anyone tell me what size socket i need for the rear wheel nut on my 2000 ec 250 cheers luke
|
#2
|
|||
|
|||
Anyone know?
|
#3
|
||||
|
||||
Its 27mm on my 07s
|
#4
|
||||
|
||||
__________________
Thanks to FLY Racing. |
#5
|
||||
|
||||
for just about any unknown bolt/nut, if you put an adjustable wrench firmly on it, then you can measure the size pretty accurately by measuring the distance between the jaws.
of course you need a good measuring device. the flat metal ones seem to work best. if you use a standard tape measure, then 'burn an inch' which means you dont use the standard bent tab end. you hold the start of the 1 inch mark on the beginning of the measurement and then read the dimension. theres 25.4 mm per 1 inch if you need to convert.
__________________
2002 Husberg FE650e 2006 GasGas EC300 2014 Sherco SER300 2014 Beta Evo Factory 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Will anything other than a GG rear wheel fit on a GG? | cal_tony | Enduro Chassis & Body | 7 | 10-02-2013 11:20 PM |
Rear Wheel Inner | Jakobi | Enduro Chassis & Body | 0 | 11-05-2010 04:57 AM |