GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 11-20-2020, 02:05 AM
Anders's Avatar
Anders Anders is online now
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 879
Default

Quote:
Originally Posted by farmerj View Post
I can have the flywheel machined to remove material and create the larger gap.

My question is - doesn't a flywheel need to be balanced? Asked another way, if I remove material by making the existing cutout wider, won't it cause the fw to be out of balance?

And does it matter which side of the cutout (or gap) the excess material is removed from?

Thanks,

Jeff
yes, I would presume you would need to balance it by removing some material on the "other side" of the flywheel.

I'm quite certain it is important that you remove material from the correct side of the gap, as this gap controls the ignition timing (if I'm not mistaken).


__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote


Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2k3 timing PEB Enduro Electrical & Wiring 2 06-26-2016 02:48 PM
Cam timing 450 FSE Just James Enduro Engine 4 stroke (including EFI & Exhaust) 6 07-18-2013 12:14 PM
PV timing? Fred1956 Enduro Engine - 2 stroke 3 04-14-2011 12:40 PM
Timing a 450? iancp5 Enduro Engine 4 stroke (including EFI & Exhaust) 4 05-28-2010 11:17 AM
For all who know Timing?? nwcycle General Discussions & Announcements 0 03-21-2009 12:25 PM




All times are GMT -5. The time now is 12:43 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org