|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2002 EC200 Chain Slider
I'm in the process of a full rebuild of my GG. My bank account is soon to be sucked dry...
Has anyone tried to cross over an aftermarket slider? I hear the swingarm is the same as a Husky WR. There are some nice sliders out there from TM, but expensive if they don't fit. Thanks all! |
#2
|
||||
|
||||
are you talking about the front slider that goes around the front of the swingarm or the rear guide by the rear sprocket ?
i have a spare oe front that is brand new..
__________________
broken down over 60 slow rider.. |
#3
|
|||
|
|||
The front slider that goes around the swing arm with the bolt that goes all the way through it to secure each side. I think the OEM may be the only one out there. I am going to call the folks at TM and see what they can do, but also interested the oem. I will send a PM. Thanks!
|
#4
|
||||
|
||||
i will shoot you a pix of it tonight.. i ordered it for a bike had for a short while, but sold the bike before i got it put on..
i dont think it was very expensive... will dig back thru jay
__________________
broken down over 60 slow rider.. |
#5
|
||||
|
||||
Trying to find the price of the new one I got from GoFasters for my 2001 full rebuild. Maybe it's this "Patin cadena" for $19.77 .
Anyway, the item from GF was a little nicer than the one that came stock in 2001, with an added guide block on the inside of the chain. It is black instead of the original white, which worked out just fine on my stealth black project. I feel your pain on the bank account thing. http://www.gasgasrider.org/forum/sho...hlight=project -dean
__________________
Thanks to FLY Racing. |
#6
|
||||
|
||||
Quote:
__________________
broken down over 60 slow rider.. |
#7
|
||||
|
||||
this is what i have..
__________________
broken down over 60 slow rider.. |
#8
|
|||
|
|||
I ended up picking up a black one, just as pictured from Hall's last night. I am putting the swing arm back together now. They charged 20 for the slider. They don't have the original "off white" one any more, it has been superceeded by the black one with guide rails. It should work fine. I also picked up the TM Designs Guide Block and the Moose adapter. It looks very trick compared to the OEM roller set up. I am picking up some replacement Moose rollers as well. They look to be a little larger, and maybe a better material. Next comes the chains and sproket. Seems like there are a TON of opinions out here on that topic. I think I'm just going with the basics here, nothing too fancy, steel on steel, and a black o-ring chain.
Thanks again all! |
#9
|
||||
|
||||
sweet... if you need something, post it up
__________________
broken down over 60 slow rider.. |
#10
|
||||
|
||||
I tried the Moose chain roller for the lower position and went back to stock. The roller with the bearings seize up and don't roll very well at all.
__________________
2004 GasGas DE250 |
Tags |
chain, slider, swingarm |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tell me about 2002 ec200 | gumbellion | Enduro Engine - 2 stroke | 7 | 01-13-2011 02:50 AM |
Chain slider question. Please help | joey11 | Enduro Chassis & Body | 3 | 12-05-2008 06:43 AM |
chain slider / chain guide crossover? | bondo | General Discussions & Announcements | 1 | 09-01-2008 09:13 PM |
2002 Ec200 | rupecopp | Enduro Engine - 2 stroke | 3 | 09-13-2007 06:50 AM |