Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-02-2015, 12:29 PM
andy176 andy176 is offline
Member
 
Join Date: Mar 2013
Posts: 32
Default ec300 running hot?

Was out yesterday on my 03 ec 300 and it was cold snow still on the ground we were in forest with not much wind after about an hours riding I noticed steam coming from the overflow pipe from the rad when stopped I topped up the rad and held about 200mls of water but after about 10mins the bike started to put steam out again an was spitting the water out again. It was a lot of slow riding as I'm only getting used to it. Is there anything I can add to the bike to help cooling and wat is the best coolant+antifreeze to use. Thanks.


Reply With Quote


  #2  
Old 02-02-2015, 01:35 PM
TheLetterJ's Avatar
TheLetterJ TheLetterJ is offline
Senior Member
 
Join Date: May 2013
Location: Santa Maria, CA USA
Posts: 185
Default

Was the bike running fine in warmer weather? My first thought is that you are running lean because of the cold/dense air (snow on the ground.) More fuel will help cool it down.
Reply With Quote
  #3  
Old 02-02-2015, 02:11 PM
andy176 andy176 is offline
Member
 
Join Date: Mar 2013
Posts: 32
Default

Hey thanks for the reply running wise it was going fine just to watm but now that you mention it I changed the jets down from a 55 and a 175 but I can't remember wat I put in i know there both smaller but they were in it when I bought it. I put the 55 and 175 in to eliminate another problem but it had nothing to do with jets so I returned it to the way I bought it. With the bigger jets in it would have lost some water but not as bad as now. I checked the impeller and its turning with the engine but doesn't look great.


Reply With Quote
  #4  
Old 02-03-2015, 07:41 PM
jimjim jimjim is offline
Senior Member
 
Join Date: Jul 2011
Posts: 189
Default

Thats ugly,maybe try a water-less coolant like Evans,how about a good cleaning with vineagar and distilled water first.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2012 ec300 running bad 1/4 to 1/2 throttle gas-gas 52 Enduro Engine - 2 stroke 6 12-20-2012 10:48 PM
03 300 not running tophat General Discussions & Announcements 22 08-23-2011 03:51 AM
My 06 EC300 not running properly! ju571n Enduro Intake/Carburetion - 2 stroke 21 07-26-2009 06:57 AM
Running hot Brian VT Enduro Engine - 2 stroke 9 10-01-2008 07:25 AM
Running In Dingo Enduro Engine - 2 stroke 3 07-26-2007 11:36 PM




All times are GMT -5. The time now is 04:46 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org