|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Aluminum preload collar
Is there a reason that one of the preload collars on kyb shock is made of aluminum? Can it be replaced with a steel collar?
|
#2
|
||||
|
||||
Probably cost.
Cheaper to make that collar out of aluminum. Do yourself a favor and install the X-Trig adjuster. |
#3
|
||||
|
||||
Every little bit of weight savings helps.
|
#4
|
|||
|
|||
Ok I will check out the x-trig. Does it replace both collars? Are they bike specific? Do you have a link where I can order one?
|
#5
|
||||
|
||||
I added the X-Trig preload adjuster to my '18. replaces both collars, no shock disassembly required. Works really well.
The YZ part fit right up with no issues at all. 07-09 YZ250F/450 XTrig part # 10200002 Any GasGas dealer would have it. |
#6
|
|||
|
|||
Thanks. Got one on the way
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fork preload | sam097 | Enduro Suspension | 5 | 10-04-2016 06:41 PM |
GPR Stabilizer Collar/Post | husley | Parts | 2 | 07-10-2015 11:09 PM |
'12 rear sag/preload | GMP | Enduro Suspension | 9 | 09-25-2012 02:09 PM |
no preload spacers | jasont1532 | Enduro Suspension | 23 | 04-07-2009 02:48 PM |
Broken Collar Bone. | jeffd | Injury & Recovery | 8 | 10-24-2006 08:51 AM |