Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-01-2013, 07:53 AM
bkrjohn bkrjohn is offline
Member
 
Join Date: Mar 2012
Location: Parker, CO
Posts: 19
Default 2011 Ec250 levers

Looking to buy a brake lever and a clutch lever. Im having a hard time finding what I need. Does anyone know what levers from other brakes will fit. I searched cross over parts in the forum and not having any luck. Thanks.


Reply With Quote


  #2  
Old 04-01-2013, 08:02 AM
GasGas's Avatar
GasGas GasGas is offline
Senior Member
 
Join Date: Aug 2007
Location: Nova Scotia, Canada
Posts: 694
Default

The brake lever is a Honda CR. The clutch lever has no cross over but I run a GG trials lever. It's a shorty. The Honda lever is available in a shorty as well.
__________________
2018 EC 300
Reply With Quote
  #3  
Old 04-01-2013, 10:10 AM
StuJohnson's Avatar
StuJohnson StuJohnson is offline
Senior Member
 
Join Date: Nov 2012
Location: Washington
Posts: 778
Default

As for clutch lever. I am a huge fan of these from Midwest Mountain Engineering.
http://midwestme.com/index.html
I have a 2012 300 and have the Magura 2 Clutch Lever installed.....One of the best clutch lever I have ever used!!!
http://midwestme.com/pages/productspage.html
__________________
2012 - XC 300 Racing
Seattle, WA
Reply With Quote
  #4  
Old 04-01-2013, 07:33 PM
bkrjohn bkrjohn is offline
Member
 
Join Date: Mar 2012
Location: Parker, CO
Posts: 19
Default

Thanks for the info. Just what I was looking for. I really like the clutch levers from Midwest mountain engineering. Im 95% sure that I have the magura 2 clutch lever on my 2011. I have looked at the pictures they have but Im just not 100% sure. Does anyone no for sure what the 2011's have. Thanks
Reply With Quote
  #5  
Old 04-01-2013, 07:53 PM
noobi's Avatar
noobi noobi is offline
Senior Member
 
Join Date: Sep 2008
Location: New Zealand
Posts: 1,031
Default

I thought the 11's still had AJP clutch masters?

Its easy enough to check, it will either say AJP or Magura on the cap.

Also, you can mount up a Magura clutch master easily enough, which makes getting spares for it much easier.


Moose make aftermarket levers for the AJP master, I think they come through partsunlimited. I don't live in the states, so can't confirm, but I had read that one of the main aftermarket company does make cheap levers for gasgas'.
Reply With Quote
  #6  
Old 04-01-2013, 09:34 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

http://www.lewisportusa.com/parts_bars_levers.htm
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #7  
Old 04-02-2013, 04:37 AM
GasGas's Avatar
GasGas GasGas is offline
Senior Member
 
Join Date: Aug 2007
Location: Nova Scotia, Canada
Posts: 694
Default

My 2011 has the AJP master.
__________________
2018 EC 300
Reply With Quote
  #8  
Old 06-27-2013, 09:34 AM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default

My 2011 EC250 Race is marked "AJP" but only on the choke lever.

The only other significant marking is "Mineral Oil."

I'd like to use the Midwest Mountain Engineering Clever Lever, but not if I have to replace the AJP.
Reply With Quote
  #9  
Old 06-27-2013, 09:39 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

Its either AJP or Magura, should be easy to tell, AJP is like your '05. Scrap that cable choke.

The Magura on the '12 comes with a nice folding lever.
Reply With Quote
  #10  
Old 06-27-2013, 09:46 AM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default

It looks like AJP to me. We kind of like the choke lever for bombing down long sand washes. I'll take it off it it becomes a problem. I already have a spare, if I can find it.

I've just completed exchanging e-mails with the owner. He said Magura and Brembo only.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 EC250 to 300??? skraMnoR Enduro Engine - 2 stroke 28 01-15-2013 08:11 PM
2011 EC250 graphics fit 2011 EC300? Jarvo_325 Enduro Chassis & Body 2 11-25-2012 06:28 PM
2011 EC250 top end redrider Enduro Engine - 2 stroke 7 11-27-2011 11:02 AM
shorty levers for 03 ec250 dank Enduro Product Reviews 3 02-21-2010 05:22 PM




All times are GMT -5. The time now is 02:16 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org