|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Polisport plastics.
Does any one know if i can make later model plastics fit on my 1998 EC250??
__________________
1998 EC250 07 Shivers 2T racing PV Spacer FMF Gnarly |
#2
|
||||
|
||||
The radiator shrouds from any year will fit all the way to 2009. The rear fenders changed in 2007, along with the number plates, and front fenders might need some bending to clear the frame but otherwise your all set.
__________________
2002 Gasgas EC250 (gone not forgotten) 2012 Ktm 300xc 2001 Gasgas EC300 Lifes journey is not to arrive safely at the grave in a well preserved body, But rather to skid in sideways totally worn out shouting holy cow what a ride !!!! |
#3
|
|||
|
|||
Not so fast,, rad shrouds for the 97 and 98 GG had different mounting locations,, both bolts were under the seat,, 99 they went with one under seat and one exposed.. If you do not have the cylinder head with the extra tall t-stat fitting you can install a 99 year fuel tank and then you get to install the newer plastic.. My 97 has the tall and the 99 tank interferes with the head.. Still looking into getting the right seat/tank shroud combo to work on my 97 or modding the head to get the newer style plastics..
__________________
Steve 16 Beta 350rr 04 KTM 525 sx/exc gone 03 KTM 625 sxc-rehab unit-did its job and now gone 03 GG 250 ec-gone 97 GG 250 ec Gone |
#4
|
||||
|
||||
Thanks for the replys Just toying with the idea of putting an 09 six days plastics and graphics on me bike.
__________________
1998 EC250 07 Shivers 2T racing PV Spacer FMF Gnarly |
#5
|
|||
|
|||
'02 and later also use side acces to the air filter which requires '02 and up air box and possibly subframe to fit the side panels. Not positive on the subframe though.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#6
|
||||
|
||||
Quote:
thanks for the response
__________________
1998 EC250 07 Shivers 2T racing PV Spacer FMF Gnarly |
#7
|
||||
|
||||
If you would like to change from that faded pinkish red to yellow I have 99 shrouds, side covers, and front fender that are in good shape only $55 plus shipping. New 99 graphics are available on ebay for $30 and a new rear fender could be picked up for about $30 so for just over $115 you could have a brand new look.
|
#8
|
|||
|
|||
Darren, im about to fit 2006 plastics to my 2002 EC300, I went to see the Gasgas uk people in Buxton, they recommended 2006 plastics for mine (in red, didnt have blue). Give them a call.
|
#9
|
|||
|
|||
Just to confirm, the 06 plastics DO fit a 2002 bike (ec300), just finished fitting mine. They are actually better designed than the original gasgas plastics, a better fit too!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Polisport Plastics | 450GASGAS | Enduro Engine 4 stroke (including EFI & Exhaust) | 4 | 10-11-2010 07:32 AM |
polisport plastics rear fender cdi mounting ? | motorhead | Enduro Chassis & Body | 1 | 06-15-2010 09:38 PM |
Old to new plastics | fastfilli | Enduro Chassis & Body | 2 | 01-24-2010 09:04 AM |
Plastics | moto9 | General Discussions & Announcements | 13 | 09-19-2009 08:58 AM |
Polisport plastic. | Ud_luz | Enduro Product Reviews | 13 | 07-08-2009 01:32 PM |