Ohlins on six days thread pitch?

[thumperrider1]

Anyone know what the thread pitch is on the Ohlins 888 shock? Is one full turn equal to 1mm?

[drorsdd]

i don't think so.
see my last post on this thread http://www.gasgasrider.org/forum/sho...t=10430&page=4

to see how ohlins suggest you should measure the preload (the spring length when fully open is 270mm)

[pistol]

I found this on the ohlins 888. Pretty interesting I thought. MI_GG888 txt.txt

Sorry I had to convert it to a txt file instead of the original pdf. Send me an email if you now how to to convert it from a pdf. motivationft@yahoo.com.

Alan

[drorsdd]

do you have a sag/spring problem?

if so post your static/dynamic sag on the rear and i can give my data as i recently had to change spring to get to the recommended sags.

you can follow my post in the other thread as get all the info i got from Ohlins sweden head technician.

cheers.

[thumperrider1]

Thanks guys. I was just trying to get the preload set to 8mm without taking the shock off and measuring since it's a pain to get the shock off.