|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Adding a map switch to 2018 XC/EC
I am wondering if the wiring coming from the 2018 ECU will allow me to install a map switch?
This might be a trivial matter to some, but I use my map switch quite a bit, especially during long races. Rain for techical climbs, or when I am tired. Sun mode for when I am in pursuit. |
#2
|
||||
|
||||
I looked into this.
The schematic shows a spot for the map switch. You can buy the CDI connectors on e-bay that are pre wired. looks the same as the KTM two strokes. Whether or not the CDI is configured for a map switch, I don't know. |
#3
|
|||
|
|||
I guess the 2019 part numbers could be informative, if we had access to 2019 part number.
My dealer (as of today) did not know the answer, and he asked last week. |
#4
|
|||
|
|||
From Mr. Berg:
Quote:
|
#5
|
|||
|
|||
Strange,,, there was an update from gasgas to update 2018 cdi to 2019.
So it should be the same cdi box right?😳 |
#6
|
|||
|
|||
One can hope.
Somehow I find it odd that GG would do a dang-fool thing like dropping a common feature it and everyone else has. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Converting 2018 EC/GP to XC start switch | Keg | Enduro Electrical & Wiring | 6 | 02-28-2021 04:25 PM |
adding oil to Shivers.... | houndog | Enduro Suspension | 4 | 04-14-2014 03:36 PM |
Adding an E-start | desertgasser300 | Enduro Electrical & Wiring | 8 | 11-13-2013 07:00 AM |
adding a battery for HID | bonkeye | Enduro Electrical & Wiring | 5 | 11-27-2012 01:14 PM |
2k-3 Swap and adding headlight | Brian | Enduro Electrical & Wiring | 28 | 10-21-2010 11:29 AM |